Search results

  1. ETS Cam Loader...this thing is really cool

    just took delivery of one of these and it works as advertised. my CZ Mags loves it. My M&P Ma legal 10 rounders is a little tougher but that's because of the ridiculous spring they have in them. Just got it today so I'll report back in a month or so and see if it does any damage to the maglips...
  2. how do you turn an M&P PC 9L into a race gun in mass and stay legal?

    I've been toying with the idea of turning my PC 9L into a race gun. I started looking at flared magwells today and they all work with extended baseplates that add rounds? How do we get around thin in this commie state? looking to get something similar to picture this going. Tim at Gartman arms...
  3. Lawman cleanfire 9mm anyone use it?

    trying to figure out if it's worth the extra $20.00 a case, I like the "idea" just wondering if it shoots as accurately as the regular lawman.
  4. Canik tp9sfx anyone have one? Review?

    this seems like a lot of gun for very little money and a couple of FFL's have them in stock for short money just wondering if anyone has one and can give us some feedback. I'm hoping this is not another ....you get what you pay for disappointment, as I'd love to grab something I can use in...
  5. What the F is up with S&W customer service??

    So I picked up a Performance center Core 9L last week , with the Shield Redo dot already installed from the factory. Loving the gun s far, looks like I got a good one as it shoots very accurately, still no trigger reset , but I have an Apex Ram ready to in (amazing that S&W refuses to do this...
  6. What brand of 9mm ammo is not "Plated", I've got a Ported barrel I want to shoot

    I'm seeing these warnings on Blazer and Federal to not use this ammo with Ported barrels, so anyone know what brand is not plated and is actually Jacketed ammo? I'm a little bummed and pissed as I have tons of blazer (that's what I always shoot) and quite a bit of American Eagle. I thought I was...
  7. Ok I want to get into this where do I start?

    I want to get into some competitive shooting (IDPA, steel plate challenges etc) I've been shooting for a couple of years now and I'd love to "hone" my skills some more. this seems like a great way to go, are there any clubs in MASS where you can go and learn how these matches work and more...
  8. Is sudbury still RED/

    I have a new co worker that I went out o lunch with today and discovered...."she is one of us"[smile] A lovely Chinese woman that lives in Sudbury and has taken her Safety class (MFS) and now wants to get her permit. Any Sudbury people here that can give me a heads up to the Chief? I see on...
  9. Driving to work this morning and almost lost it

    Pulled alongside a Prius heading north and saw the "H" sticker on the back window, as he pulled further ahead I saw he had a "Repeal the 2nd Amendment" sticker on his bumper. I pulled up next to him and got his attention and gave him the bird. A special kind of stupid was this man. Infuriating...
  10. Does anyone know what S&W specifically does to their triggers to make them mass comp?

    I've got a shield that is a 2015. Greg Derr did the trigger for me (nice and smooth and a great crisp reset) but it feels like it only brought it down to about 7 pounds. Initially I was ok with this (my first carry gun and no safety) but my my other pistols (9C and an XDM 3.8C .45) have lighter...
  11. Anyone have any experience with the gunsmiths at Gartman Arms?

    I just ordered some Trijicon sights for my XDM 3.8C .45, and saw that they have 2 gunsmiths over there now? Gartman is fairly close by so I figured I may check them out. Any "Good" or "Bad" experiences with these guys? PM me if more appropriate
  12. Lawman 124gr 9mm...probably the best shooting 9mm round I've come across so far.

    Grabbed a few 100 rounds of this stuff last week. Was pleasantly surprised, through my M&P 9C this stuff was consistently dead on out to about 50 feet (which is great for me) through my shield out to about 35 feet. No failures of any kind and has a great "feel" to it. I've been using Blazer and...
  13. Sellier & Bellot 9mm 115 grain good lord this stuff is hot :)

    I grabbed a box fo this at FS last week just to give it a try. Shot in doors at Massapoag yesterday, did a comparison with the S&B, Federal Premium aluminum (Wallyworld special) and Blaser Brass 'Brass" 115 the shells ejecting from the S&B were bouncing off of the ceiling with some serious...
  14. Just got a StealthGear "Mini" for my 9C Ya Buddy!!!!

    I have several Stealth gear holsters (an Onyx and a Flex for my shield) and a Flex for my XDM 3.8C .45. the Mini is a smaller version of their Onyx and is a relatively new addition to their line up. So far it feels good, my 9C doesn't feel much bigger in this than my shield does in the Onyx...
  15. Do you still need a license/Permit to carry concealed in Maine?

    As of October 15, 2015 I no longer need a permit to conceal carry in Maine? http://www.maine.gov/dps/msp/licenses/weapons_permits.html
  16. You .45ACP guys what do you use for SD ammo?

    I bought a box of Speer Gold dots and a box of Remington Golden Sabers , both 230 grain and hit the range today with a buddy of mine who is retired from the Sheriff's department. I also bought of box of my usual range ammo the CCI Blazer Brass 230 grain. We were both surprised at how hot the 2...
  17. Some size comparison pics of a Shield and the XDM

    the shield is a 9mm and the XDM is a .45. just some pics so people can get an idea of the size of each (if interested) both have flush mags in with pierce pinky extensions. XDM has Talon rubber grips , shield has Pachmyr sleeve. the XDM is actually very close in size to what an M&P .9/40...
  18. Has anyone here had the chance to shoot the Springfield XDM Mod2 in .45 acp?

    Recently I've decided that I think I want to add a .45 to the "armory". The Shield looks promising, but I've been really smitten by the spec's and videos I've seen of the Springfield XDM Mod 2. It looks like it's pretty much exactly what I'd be looking for , but alas.......I cannot find one to...
  19. Tried Some federal Premium Aluminum 9mm today

    They had some at the Walpole Wal-Mart on Saturday so I grabbed a couple of boxes to test it with my shield and my FS M&P .40 (with Storm lake Conversion barrel and 9mm mags which has been perfect for over 400 rounds so far). I brought the Fed Aluminum and a box for Aquila 9, both 115 gr to...
  20. What are the actual legalities of using a non mass compliant handgun?

    I'm trying to wrap my head around this so someone please educate me. I see lots ads for people doing face to face transfers on guns that are not mass compliant like Glocks, M&P .22 and Springfield Armory etc. so what are the legalities of this? Say I bought an Xdm Mod 2 9mm off of someone in...
Top Bottom