If you enjoy the forum please consider supporting it by signing up for a NES Membership The benefits pay for the membership many times over.
Be sure to enter the NES/Pioneer Valley Arms April Giveaway ***Smith & Wesson SD9VE 9MM***

Reply to thread

Message

Thanks for the replies gents.
Lead is glued to 1” plywood.
Scrap is different sizes from 1” wide strips to 1 foot wide panel cutouts. All different lengths.
Lead is new 1/4” thick.
I strip it off the plywood as best I can but some pieces have wood still attached.
Outdoor fire not an issue in So. NH.
Was going to use a propane turkey fryer type burner.
What kind and size “pot” for smelting pouring?
I’ve seen guys pour into muffin tins for billet moulds. YouTube natch

[QUOTE="240Geezer, post: 7204004, member: 76117"] Thanks for the replies gents. Lead is glued to 1” plywood. Scrap is different sizes from 1” wide strips to 1 foot wide panel cutouts. All different lengths. Lead is new 1/4” thick. I strip it off the plywood as best I can but some pieces have wood still attached. Outdoor fire not an issue in So. NH. Was going to use a propane turkey fryer type burner. What kind and size “pot” for smelting pouring? I’ve seen guys pour into muffin tins for billet moulds. YouTube natch🤣 [/QUOTE]

Verification