[MEDIA=amazon]B074DFMR8K[/MEDIA]
View: https://www.amazon.com/AmazonBasics-Pre-Seasoned-Dutch-Handles-2-Quart/dp/B074DFMR8K
[MEDIA=amazon]B001OPLJUU[/MEDIA]
View: https://www.amazon.com/Lyman-Casting-Dipper-Multicolor-Size/dp/B001OPLJUU
or spend less - bend the handle and put a pouring lip in
[MEDIA=amazon]B001VZAWQU[/MEDIA]
View: https://www.amazon.com/Winco-Stainless-Steel-Ladle-2-Ounce/dp/B001VZAWQU
Needs a mod to the control to get the temperature up high enough (easy)
[URL unfurl="true"]https://www.walmart.com/ip/Salton-HP1940-Portable-Cooktop-Single-Black/306705476[/URL]
Molds - buy what you can get
Lee 2 cavity molds are a good way to start out but their bullet profiles are cut for low production cost not the best bullet performance
An exception - Double Cavity Mold 356-120-TC
Works great when HiTec coated with a slower powder in 9mm
Lubing cab be done with tumble lube, powder coat or HiTec
Powder coat or Hitec will need a toaster oven to cure the coating so add $30-40 for a cheap oven.
