scottarmy6
NES Member
Have you ever wanted to make everyone jealous at a reenactment? Or sick of reloading while at the range when there is paper or steel plates that need to be introduced to freedom seeds at a steady rate?
Then worry no more!
Have a bit of a unique unicorn here.
This is a Browning 1919A4 in original 30cal (30-06) full kit. Saginaw steering gear division stamped. All original except the semi installed side plate. Comes with everything you could need.
Tri-pod to make sure your arms don’t get tired and you remain low so the enemy can’t see you well
Check
A original traverse and elevation to make sure you can stay on target with tears on happiness in your eyes
Check
Spare barrel to ensure none stop fun
Check
Spare parts kit with canvas roll correctly filled with NOS parts to ensure all systems run until your kids have kids
Check
Cloth belts as well as disintegrating metal links to keep good time going
Check
The actual list
Browning 1919A4 with aluminum trunnion protector (for metal links) -has semi only side plate to make it a non-NFA as it sits-
Spare 30cal barrel
Spare parts roll
Full tripod setup with T&E
WW2 ammo can with a 225rd belt cloth a 70rd short belt (to let friends try)
750 rds of loose 30cal in cans
250 rds metal belted ball
250 rds of belted tracers
A 250rd belted can that approx 30-40 have been spent
Reproduction wooden storage box
Reproduction side saddle ammo can (100rd for vehicle mounts)
Located-near Devens, this kit has been in the state since early 2000s
This is an incredibly clean, well kept and taken care of example of a browning 1919a4.
Not much else I can say about it, kinda speaks for itself.
I hope this will go to someone who loves WW2 history like I do. The one thing I hope they do different than me is shoot it more, it’s an incredible display setup and love seeing it in my area but it deserves to be run.
Price- $10.5k $14k OBO or a combo trade offer-open to using PP/venmo DM to discuss- definitely open to BTC or ETH
Possible trades
-Barrett 50 m82a1 or m107a1
-Sig MCX Spear in 762 nato
-SVT-40
-Desert tech Wolverine in 762
-9mm target pistols (CZs)
-M1A super match or socom
-Nighthawk pistols (in particular Sandhawk)
-Brass lever guns (in particular 357 or 44)
-Nightforce scopes or Acog setups
-or if you have something that interesting or ww2 era doesn’t hurt to send a DM
-other non-pew pew I’m looking for is
-ATV Honda 450 or bigger or side by side for light trails and plowing or pulling trailer.
-Good condition Willy’s or M38 Jeep
-Older classic pickups like a C10
-NVG setups
-PTO wood chipper or 6’ brush hog
—again if you have an idea, send a DM and we can start a conversation from there--
View: https://www.facebook.com/share/v/15aGen7To1/?mibextid=UalRPS
Thank you for reading all of this dribble that my brain put on this ad.
Hopefully this either perked your interest or made you laugh!
I was politely reminded that i forgot to add this
Statement of Legal compliance:
I will comply with all Federal and State Laws. If the firearm is to be shipped, you must provide me with a signed copy of your dealer's FFL (or your 03FFL if this is a Curio and Relic). For private party face-to-face transactions (only permitted by Fed law when both buyer and seller live in same state), I will meet all applicable state and federal laws.
When ammunition, magazines or other regulated items are sold/bought or traded as part of this transaction, I agree to follow all applicable local, state and federal laws and regulations pertaining to these items.
Then worry no more!
Have a bit of a unique unicorn here.
This is a Browning 1919A4 in original 30cal (30-06) full kit. Saginaw steering gear division stamped. All original except the semi installed side plate. Comes with everything you could need.
Tri-pod to make sure your arms don’t get tired and you remain low so the enemy can’t see you well
Check
A original traverse and elevation to make sure you can stay on target with tears on happiness in your eyes
Check
Spare barrel to ensure none stop fun
Check
Spare parts kit with canvas roll correctly filled with NOS parts to ensure all systems run until your kids have kids
Check
Cloth belts as well as disintegrating metal links to keep good time going
Check
The actual list
Browning 1919A4 with aluminum trunnion protector (for metal links) -has semi only side plate to make it a non-NFA as it sits-
Spare 30cal barrel
Spare parts roll
Full tripod setup with T&E
WW2 ammo can with a 225rd belt cloth a 70rd short belt (to let friends try)
750 rds of loose 30cal in cans
250 rds metal belted ball
250 rds of belted tracers
A 250rd belted can that approx 30-40 have been spent
Reproduction wooden storage box
Reproduction side saddle ammo can (100rd for vehicle mounts)
Located-near Devens, this kit has been in the state since early 2000s
This is an incredibly clean, well kept and taken care of example of a browning 1919a4.
Not much else I can say about it, kinda speaks for itself.
I hope this will go to someone who loves WW2 history like I do. The one thing I hope they do different than me is shoot it more, it’s an incredible display setup and love seeing it in my area but it deserves to be run.
Price- $10.5k $
Possible trades
-Barrett 50 m82a1 or m107a1
-Sig MCX Spear in 762 nato
-SVT-40
-Desert tech Wolverine in 762
-9mm target pistols (CZs)
-M1A super match or socom
-Nighthawk pistols (in particular Sandhawk)
-Brass lever guns (in particular 357 or 44)
-Nightforce scopes or Acog setups
-or if you have something that interesting or ww2 era doesn’t hurt to send a DM
-other non-pew pew I’m looking for is
-ATV Honda 450 or bigger or side by side for light trails and plowing or pulling trailer.
-Good condition Willy’s or M38 Jeep
-Older classic pickups like a C10
-NVG setups
-PTO wood chipper or 6’ brush hog
—again if you have an idea, send a DM and we can start a conversation from there--
View: https://www.facebook.com/share/v/15aGen7To1/?mibextid=UalRPS
Thank you for reading all of this dribble that my brain put on this ad.
Hopefully this either perked your interest or made you laugh!
I was politely reminded that i forgot to add this
Statement of Legal compliance:
I will comply with all Federal and State Laws. If the firearm is to be shipped, you must provide me with a signed copy of your dealer's FFL (or your 03FFL if this is a Curio and Relic). For private party face-to-face transactions (only permitted by Fed law when both buyer and seller live in same state), I will meet all applicable state and federal laws.
When ammunition, magazines or other regulated items are sold/bought or traded as part of this transaction, I agree to follow all applicable local, state and federal laws and regulations pertaining to these items.
Attachments
-
IMG_0341.jpeg -
IMG_7106.jpeg -
IMG_7103.jpeg -
IMG_4188.jpeg -
IMG_4191.jpeg -
IMG_4189.jpeg -
IMG_4192.jpeg -
IMG_4193.jpeg -
IMG_4194.jpeg -
IMG_4196.jpeg -
IMG_4197.jpeg -
IMG_4198.jpeg -
IMG_4199.jpeg -
IMG_4200.jpeg -
IMG_4201.jpeg -
IMG_4202.jpeg -
IMG_4203.jpeg -
IMG_4204.jpeg -
IMG_4205.jpeg -
IMG_4206.jpeg -
IMG_4207.jpeg -
IMG_4208.jpeg -
IMG_4209.jpeg -
IMG_4186.jpeg -
IMG_4187.jpeg
Last edited:
”……..
