NH Phantom
NES Member
Building my bench. Looking for the 2 front hole distance center to center on the strong mount. I want to add bracing where the mount will bolt through so I can lag to the bracing not just the top
Thanks
Thanks
If you enjoy the forum please consider supporting it by signing up for a NES Membership The benefits pay for the membership many times over.
Building my bench. Looking for the 2 front hole distance center to center on the strong mount. I want to add bracing where the mount will bolt through so I can lag to the bracing not just the top
Thanks
Building my bench. Looking for the 2 front hole distance center to center on the strong mount. I want to add bracing where the mount will bolt through so I can lag to the bracing not just the top
Thanks
I have a strong mount on my 650 and the spacing is different. The front holes, center to center are 10 1/2". You didn't ask but front to back is 9" and the height is 6 3/4". If you add a strong mount and a case feeder, make sure you have enough ceiling height.
The different heights must be different dimentions. Dont know which one i have. Bought it new about 4 years ago.I had to go downstairs to confirm that they are both Dillon Strong Mounts and they are both 11-1/4" center to center for the front holes and 9" in depth.
i already have the dillon but may change to inlineIf you are ordering the Dillon one you should look at Inline fabrications (strong mounts) before you order. I have one for my 750 and IMO its better that the Dillon one. They make all manner of mounts and accessories. Here's the link: Dillon – Inline Fabrication
The different heights must be different dimentions. Dont know which one i have. Bought it new about 4 years ago.
thank you!!From the top of the bench to the top of the case feeder is 41". I have a 650 w/casefeeder and strong mount
think good if you need a riser at all, if you intend to sit by the bench. if you will do all work while standing up - then the riser is needed.I’m liking the in-line flush mount with a riser. May change to that
If you are ordering the Dillon one you should look at Inline fabrications (strong mounts) before you order. I have one for my 750 and IMO its better that the Dillon one. They make all manner of mounts and accessories. Here's the link: Dillon – Inline Fabrication