1903Collector
NES Member
I picked up a new 4.25" SA Emissary couple of weeks ago, I really like this pistol, it checks a lot of boxes for me and I would like to CCW it at some point but the pistol has two annoying issues that don't seem to be getting better. 1st is a FTF, the round gets jammed up about half way into the chamber. From what I have read it's more than likely an extractor issue. I read on another forum that you can pull the extractor and bend is ever so slightly and they may solve the issue? does that sound right.
The other issue is I think, it has a very tight chamber, all factory FMJ chamber without an issue but my reloads and some Sig HP would not let the slide go into battery, I actually had to put the front of the slide on the bench and whack it to release the semi-chambered round. So I have thoroughly cleaned the pistol twice and over two range session fired 350 rounds, I know that's not much but I thought I would see some improvement as things loosened up a bit.
Should I send back to SA or give it some more shakedown time?
Walt
The other issue is I think, it has a very tight chamber, all factory FMJ chamber without an issue but my reloads and some Sig HP would not let the slide go into battery, I actually had to put the front of the slide on the bench and whack it to release the semi-chambered round. So I have thoroughly cleaned the pistol twice and over two range session fired 350 rounds, I know that's not much but I thought I would see some improvement as things loosened up a bit.
Should I send back to SA or give it some more shakedown time?
Walt
Last edited: