Ruger MkII "Ultimate Cliploader"?

[Coyote33]

Found this "Ultimate Cliploader".

Has anyone had any experience with this device?

Available here: http://powercustom.com/store/index.php?main_page=product_info&cPath=11&products_id=327

 

[Climbnsink]

Used a similar one for 10-22s that works OK. The 3 dollar slip over the top devices work fine for MkIIs. The little button hurts after a while, dropping the rounds in is no big deal.

 

[RichM]

I have it for my Rugers... it works very well almost all the time! The only issue is that occasionally, a cartridge will "stand up" in the magazine instead of landing on the stack.

I use it all the time. You won't regret the purchase!

... and you will go through ammunition MUCH FASTER with this... ask me how I know!

 

[Bob J]

I've used one for a number of years and have found it to be a great time saver when loading my MkIII mags.... If you shoot the Ruger MkII or MkIII you will not regret picking one up....

Found this "Ultimate Cliploader".

Has anyone had any experience with this device?

Available here: http://powercustom.com/store/index.php?main_page=product_info&cPath=11&products_id=327

 

[IPSC_DRL]

Looks slick. Being a cheapo, I found a free solution to the sore thumb while loading mags for the Mk-II years ago. I took the filler plate from the rear of a PC (where modems and such plug in) and bent the metal around the screw slot a little. I them wrapped a piece of thin foam around it and taped in place. This makes a comfortable "handle" for pulling down the button on the side of the magazine. I hook the notch over the button and pull down. Then slip the notch behind the button and the little bends hold it in place with friction. Drop the rounds in and remove the "puller". I'll try to post a picture when I have a chance.