Biff Quizler
NES Member
For sale (actually back up with more) is a Sig 320 package as follows:
- 320 FCU - no safety and skeletonized trigger. Just realizing this is a Sig Custom Works set up (skeletonized trigger and S/N starting with FCU (FCU653###) Great trigger pull. Sig site says it's made of titanium nitride (not sure why that better ...but it's special I guesss), retails for $350.
P320 FCU
- Complete Sig ProCut 3.9 Carry/Compact slide with standard height sights - Complete = w/ factory bbl and spring. Stripped slide alone runs $440
P320 PRO-CUT CARRY/COMPACT 9MM 3.9" SLIDE ASSEMBLY, OPTIC READY, BLACK
- Romeo 1 Pro red dot (very visible dot think it's a 6 MOA but might be 2 MOA) with aluminum shroud
- a Sig TRX Carry sized grip module w/tungsten weights + flared magwell (believe it or not... combo adds up to $350 retail on Sig store)
- a basically new Sig Carry Medium grip module (where the FCU currently sits) Not sure I've even shot it with in this module.
- one - 10 rnd mag with base plate that fits the flared magwell.
With the standard carry module this is pretty much the set up NES' "beloved" MSP troopers are carrying except the Procut slide makes it lighter (and I think they have mounted light). This is an excellent shooter, the TRX module being a touch heavier flattens the minimal 9mm recoil nicely.
Only reason I'm parting with is that I don't shoot it, even after I swapped it to the standard grip ... I jumped on the P365 bandwagon for smaller carry and if I go out to shoot a full sized gun my go to is another platform.
If you throw all the stuff together rough guesstimate is that it'd be over $1500 for everything. For price below you get a Sig plastic case and a gun lock.
Price is $1000 cash for a high end 320 set up for carry or range play.
I'm usually a trade hound but really gotta start thinning things out (but if you had a metal framed M&P 9 Competitor or Carry Comp that might be calling my name)
I'm in WMass - Amherst/Greenfield area - will do FTF deal out here on eFA-10.
And from the 2010 Moderator request on classifed ads.....
Statement of Legal compliance:
I will comply with all Federal and State Laws. If the firearm is to be shipped, you must provide me with a signed copy of your dealer's FFL (or your 03FFL if this is a Curio and Relic). For private party face-to-face transactions (only permitted by Fed law when both buyer and seller live in same state), I will meet all applicable state and federal laws.
When ammunition, magazines or other regulated items are sold/bought or traded as part of this transaction, I agree to follow all applicable local, state and federal laws and regulations pertaining to these items.
- 320 FCU - no safety and skeletonized trigger. Just realizing this is a Sig Custom Works set up (skeletonized trigger and S/N starting with FCU (FCU653###) Great trigger pull. Sig site says it's made of titanium nitride (not sure why that better ...but it's special I guesss), retails for $350.
P320 FCU
- Complete Sig ProCut 3.9 Carry/Compact slide with standard height sights - Complete = w/ factory bbl and spring. Stripped slide alone runs $440
P320 PRO-CUT CARRY/COMPACT 9MM 3.9" SLIDE ASSEMBLY, OPTIC READY, BLACK
- Romeo 1 Pro red dot (very visible dot think it's a 6 MOA but might be 2 MOA) with aluminum shroud
- a Sig TRX Carry sized grip module w/tungsten weights + flared magwell (believe it or not... combo adds up to $350 retail on Sig store)
- a basically new Sig Carry Medium grip module (where the FCU currently sits) Not sure I've even shot it with in this module.
- one - 10 rnd mag with base plate that fits the flared magwell.
With the standard carry module this is pretty much the set up NES' "beloved" MSP troopers are carrying except the Procut slide makes it lighter (and I think they have mounted light). This is an excellent shooter, the TRX module being a touch heavier flattens the minimal 9mm recoil nicely.
Only reason I'm parting with is that I don't shoot it, even after I swapped it to the standard grip ... I jumped on the P365 bandwagon for smaller carry and if I go out to shoot a full sized gun my go to is another platform.
If you throw all the stuff together rough guesstimate is that it'd be over $1500 for everything. For price below you get a Sig plastic case and a gun lock.
Price is $1000 cash for a high end 320 set up for carry or range play.
I'm usually a trade hound but really gotta start thinning things out (but if you had a metal framed M&P 9 Competitor or Carry Comp that might be calling my name)
I'm in WMass - Amherst/Greenfield area - will do FTF deal out here on eFA-10.
And from the 2010 Moderator request on classifed ads.....
Statement of Legal compliance:
I will comply with all Federal and State Laws. If the firearm is to be shipped, you must provide me with a signed copy of your dealer's FFL (or your 03FFL if this is a Curio and Relic). For private party face-to-face transactions (only permitted by Fed law when both buyer and seller live in same state), I will meet all applicable state and federal laws.
When ammunition, magazines or other regulated items are sold/bought or traded as part of this transaction, I agree to follow all applicable local, state and federal laws and regulations pertaining to these items.
