If you enjoy the forum please consider supporting it by signing up for a NES Membership The benefits pay for the membership many times over.
Be sure to enter the NES/Pioneer Valley Arms April Giveaway ***Smith & Wesson SD9VE 9MM***

Reply to thread

Message

2 years since we moved and I finally got my sorting, wet tumbling table back together. Granted we renovated the entire house in the meantime, but I was itching for a while to get this done. I use a Dillon CV750 with a 5 gallon bucket bolted on, with the yellow, blue, black (.380 aluminum tray in the bottom) sorter trays with 5 gallon bucket top sections as spacers to sort. It’s hooked up a foot pedal, so toss in a bunch, stomp on the peddle and it rattles away. Loud enough where headphones are required, but it’s faster than hand sorting. I deprime on a separate press, then wet tumble, then separate the stainless media, roll size and finally load. I know I could cut out all the middle steps but it’s a hobby and I enjoy the process.

[QUOTE="quinnjalan, post: 7427331, member: 37764"] 2 years since we moved and I finally got my sorting, wet tumbling table back together. Granted we renovated the entire house in the meantime, but I was itching for a while to get this done. I use a Dillon CV750 with a 5 gallon bucket bolted on, with the yellow, blue, black (.380 aluminum tray in the bottom) sorter trays with 5 gallon bucket top sections as spacers to sort. It’s hooked up a foot pedal, so toss in a bunch, stomp on the peddle and it rattles away. Loud enough where headphones are required, but it’s faster than hand sorting. I deprime on a separate press, then wet tumble, then separate the stainless media, roll size and finally load. I know I could cut out all the middle steps but it’s a hobby and I enjoy the process. [/QUOTE]

Verification