WTS WINCHESTER MODEL 12 Parts Cache - If you need it, I probably have it.

creedbratt0n

NES Member
Joined
Mar 26, 2021
Messages
65
Likes
71
Feedback: 11 / 0 / 0
Hello friends,

I’ve recently come into possession of a large cache of Winchester Model 12 parts. I’m going to be building a dozen or so shotguns, but I’ll still have hundreds and hundreds of parts leftover.

I’m still processing, so this post is likely going to evolve with time. I’d like to make this a one-stop for anybody who might need spare parts for their Model 12.

Some of what I have:

Complete Trigger groups -$60-$90
Safeties - $30
Complete bolt assamblies -$80-$110
Action Slide Caps $5
Action Slide Locks - $40
Adjusting Sleeve - $40
Barrel Chamber Ring - $10
Carriers - $50-$90
Cartridge cutoffs - $20
Extractors - $25
Left extractors - $25
Firing pin retractors - $30
Hammer with Guide Rod - $50
Hammer without guide rod - $40
Guide rods - $10
Magazine Bands - $30-$40
Magazine Band Bushing - $20
Magazine Followers - $10
Magazine plugs $25
Magazine Plug Stops - $10
Receiver Extensions - $50
Receiver Shanks - $15
Stock Bolts - $5
Trigger shoes - $30-$50

I also have plenty of screws and springs to identify. I’m happy to work deals out for bundles! Buy buy buy!

I am in search of magazine tubes, barrels, wood furniture, and action slides. If you have those, we could certain work a trade or purchase.

This is obviously a lot. If I get stuff wrong it’s because I’m still learning this platform. I’m happy to learn from anybody out there if you have intimate knowledge of this gun and would like to provide fun facts. This project is a massive undertaking and I’m very much looking forward to the challenge.

If I end up shipping, you can pay. I use pirateship and I’m guess most of you are in New England so I don’t foresee it being more than say $5.

Thank you guys so much for looking. Please message me with any questions or comments
 

Attachments

  • 1ACD1C1A-6440-4615-8FB6-3A39B579CA7B.jpeg
    1ACD1C1A-6440-4615-8FB6-3A39B579CA7B.jpeg
    1.1 MB · Views: 237
  • 6ACCD962-7DA6-4497-8AED-B9DC30593F7D.jpeg
    6ACCD962-7DA6-4497-8AED-B9DC30593F7D.jpeg
    1.1 MB · Views: 191
  • 802C9D13-4C0F-431C-9467-B9151786711A.jpeg
    802C9D13-4C0F-431C-9467-B9151786711A.jpeg
    479.3 KB · Views: 176
  • 868122AC-3B63-4293-8F91-7BA34161DC30.jpeg
    868122AC-3B63-4293-8F91-7BA34161DC30.jpeg
    500.4 KB · Views: 147
  • D36216C5-A116-4902-8000-EEC2D70F7BA6.jpeg
    D36216C5-A116-4902-8000-EEC2D70F7BA6.jpeg
    497.5 KB · Views: 150
  • EE41337E-355D-4A6B-A59B-359393CECA00.jpeg
    EE41337E-355D-4A6B-A59B-359393CECA00.jpeg
    510.5 KB · Views: 150
  • B692A523-94FB-4612-B57F-6A04C50BFC9E.jpeg
    B692A523-94FB-4612-B57F-6A04C50BFC9E.jpeg
    625.8 KB · Views: 177
  • 5B377730-D592-43D6-9D59-3575314BEFC4.jpeg
    5B377730-D592-43D6-9D59-3575314BEFC4.jpeg
    527.7 KB · Views: 155
  • D09E5167-79A5-4DDC-942E-4F136BC8A683.jpeg
    D09E5167-79A5-4DDC-942E-4F136BC8A683.jpeg
    580.5 KB · Views: 152
  • 92056F09-753D-4204-9EE8-5387C016D2CC.jpeg
    92056F09-753D-4204-9EE8-5387C016D2CC.jpeg
    843.3 KB · Views: 204
Hello friends,

I’ve recently come into possession of a large cache of Winchester Model 12 parts. I’m going to be building a dozen or so shotguns, but I’ll still have hundreds and hundreds of parts leftover.

I’m still processing, so this post is likely going to evolve with time. I’d like to make this a one-stop for anybody who might need spare parts for their Model 12.

Some of what I have:

Complete Trigger groups -$60-$90
Safeties - $30
Complete bolt assamblies -$80-$110
Action Slide Caps $5
Action Slide Locks - $40
Adjusting Sleeve - $40
Barrel Chamber Ring - $10
Carriers - $50-$90
Cartridge cutoffs - $20
Extractors - $25
Left extractors - $25
Firing pin retractors - $30
Hammer with Guide Rod - $50
Hammer without guide rod - $40
Guide rods - $10
Magazine Bands - $30-$40
Magazine Band Bushing - $20
Magazine Followers - $10
Magazine plugs $25
Magazine Plug Stops - $10
Receiver Extensions - $50
Receiver Shanks - $15
Stock Bolts - $5
Trigger shoes - $30-$50

I also have plenty of screws and springs to identify. I’m happy to work deals out for bundles! Buy buy buy!

I am in search of magazine tubes, barrels, wood furniture, and action slides. If you have those, we could certain work a trade or purchase.

This is obviously a lot. If I get stuff wrong it’s because I’m still learning this platform. I’m happy to learn from anybody out there if you have intimate knowledge of this gun and would like to provide fun facts. This project is a massive undertaking and I’m very much looking forward to the challenge.

If I end up shipping, you can pay. I use pirateship and I’m guess most of you are in New England so I don’t foresee it being more than say $5.

Thank you guys so much for looking. Please message me with any questions or comments
Bump
 
Back
Top Bottom