CoastieRon
NES Member
And now I'm thinking you know, I didn't spend too much on the rifle, that At-One stock is looking pretty good....
-
If you enjoy the forum please consider supporting it by signing up for a NES Membership The benefits pay for the membership many times over.
-
Be sure to enter the NES/Pioneer Valley Arms February Giveaway ***Smith & Wesson SD9VE 9MM***
.22LR rifle for Rimfire Rifle League - CZ455 Tacticool
- Thread starter CoastieRon
- Start date
I was looking at the AT-One Thumbhole stock for my 77/22. The factory stock is very uncomfortable for me. I was thinking either the Varmint stock or the spend extra for the AT-One. But I'm not really getting great accuracy out of the 77/22 so I'm not sure I want to spend money on it that I could put to the CZ.
CoastieRon
NES Member
I'm gonna roll as is until next season. Maybe put like a pack style cheek riser on there for now. I have to spend more time on it before making a decision on changing the whole stock out.
is the CZ stock wood or composite?
You can install one of these type kits for short money
870 | GRACO Corporation
Last edited:
I had time to run the 10/22 build with muellet . I have the mil dot version ad Im generally shooting 25-200 yards at random size steel where hits are fine. The. Mil dot gives me some added MOA adjustment. I installed the burris signature rings to get extra adjustment also.
The mueller runs out of adjustment pretty quick shooting 22lr out past 100 yards.
Shot 50 rounds of SK standard plus which is decent ammo. I had a few off sounding shots in this box. Shot on 32X at 100 yards from the rest.
View: https://imgur.com/a/xxUeecm
i did not spend a lot of time trying to really dial it in. I h st wanted to get it close before using the good ammo this set up likes. The low group 6 oclock 7 ring was my last 10 shots. Almost MOA
The mueller runs out of adjustment pretty quick shooting 22lr out past 100 yards.
Shot 50 rounds of SK standard plus which is decent ammo. I had a few off sounding shots in this box. Shot on 32X at 100 yards from the rest.
View: https://imgur.com/a/xxUeecm
i did not spend a lot of time trying to really dial it in. I h st wanted to get it close before using the good ammo this set up likes. The low group 6 oclock 7 ring was my last 10 shots. Almost MOA
Last edited:
CoastieRon
NES Member
Today is league day. Hoping top see my score go up a little LOL.
CoastieRon
NES Member
Shot two weeks (I had to make up a week). Started practice shots in bipod and promptly switched back to the bag.
Shot 205 on the first, 196 on the second . More time behind it will help
Shot 205 on the first, 196 on the second . More time behind it will help
CoastieRon
NES Member
They're in the truck, I'll take a pic after my meeting
CoastieRon
NES Member
All right. First target (#3) is the 205. Top row is sight in, and the first square was on bipod, second on bag, then I went for it:
second target (#2) I did one practice mag of 5, then went for it, on the bag again:
Each square is 2.5"x2.5", and the bull is 1/2". Shooting at 50 yards
I still need a lot of work LOL
Last edited:
You've probably mentioned it here somewhere, but what ammo are you using?
P.S. I think you are being hard on yourself with the scoring. If it touches the ring, you get the higher score. I see a few targets there that are a point higher than you scored it.
CoastieRon
NES Member
Scoring for the club is it has to break the next line. Thanks though, I still think I could be better. I think I'm sitting at 12th out of 18.
I'm using the Federal HV Match solid 40 grain right now. I haven't sat down with different ammo yet to see what it likes.
CoastieRon
NES Member
I think I have some CCI...
CoastieRon
NES Member
Ha!Bro...should have just went for the precision trainer...now you’ll have 2 CZ .22s.Not a bad thing I guess
No, I think this one is the right one. I just need to redneck the cheek weld, and I'm good to go.
I decided to give my BiL the Vortex 6-24x50 for his birthday. He's such a great guy, does a lot for the scouts, keeps me in line. I told him he could use it, but decided I would wrap it up for him.
You seem to be missing more shots to the right .
Trigger/hand grip -_why you see these bench guys pinching the trigger. Also matters not how light the trigger is if your clenching your grip as you pull the trigger it will "twist" the action.
shoulder pocket its easy to press that shoulder or change pressure through the shot.
As far as ammo goes, I have yet to use any HV stuff that will get you even close to that 1\2" dot.
Try some SV basically 1100fps or less.
Its to bad they dont make a semi wad cutter for 22lr to cut nice holes in targets.
CoastieRon
NES Member
I hadn't even noticed I was missing more to the right until you mentioned it. I have a YoDave trigger kit on the way to get the pull weight down. I definitely have to work on consistent trigger position and pull.
CoastieRon
NES Member
LOL, it's pulling right, and the left shots are overcompensating.
I got this pad in and it adjusted my eye relief just right. I'm going to run through a few different ammos this weekend.
Put my own flair on it...
I got this pad in and it adjusted my eye relief just right. I'm going to run through a few different ammos this weekend.
Put my own flair on it...
CoastieRon
NES Member
Holy crap that's awesome.
so basically your a half minute off to the right and low.
heres my practice target its 1/2" circles. This one will scan into my software real easy rather than doing a manual input from other tartgets
The blue/green line is your group center.
Its pretty cool software a bit dated and sometimes a pita to use but i like playing around with it when I cant get to the range.
Fun S&Gs you could add a 1/2 min left and shoot again in attempt to cheat your pull....
so basically your a half minute off to the right and low.
heres my practice target its 1/2" circles. This one will scan into my software real easy rather than doing a manual input from other tartgets
How does this all work? Is it something you just download and print out?
Heres the free version.
View: https://www.youtube.com/watch?v=JLPKnUjvkPo
they have a paid version that does what you see above.
you enter a picture of the target and plot your aim points and shots. With any target/pic you have to manually enter each aim point and shot. The program has pre entered targets you can print out and scan in to the program and it will pick up the data automatically. Im not to tech smart so thats about all I can say.
View: https://www.youtube.com/watch?v=JLPKnUjvkPo
they have a paid version that does what you see above.
you enter a picture of the target and plot your aim points and shots. With any target/pic you have to manually enter each aim point and shot. The program has pre entered targets you can print out and scan in to the program and it will pick up the data automatically. Im not to tech smart so thats about all I can say.
Silly question. You mention "aim point". Isn't the "aim point" always the center of the bull's eye?
Anyhow, it seems like simple technology. Pretty cool. Need to try it out.I am guessing it needs to be registered to have no skew and to be a certain brightness so things can line up right.
Anyhow, it seems like simple technology. Pretty cool. Need to try it out.I am guessing it needs to be registered to have no skew and to be a certain brightness so things can line up right.
