One of the screws stripped out of the stalk and I can't seem to find a replacement online. Any idea where I can buy a stock blonde thumbhole stalk for this thing? I don't want to convert it to a pistol grip.
-
If you enjoy the forum please consider supporting it by signing up for a NES Membership The benefits pay for the membership many times over.
-
Be sure to enter the NES/Pioneer Valley Arms February Giveaway ***Smith & Wesson SD9VE 9MM***
AK47 MAK90 Thumbhole Stock
- Thread starter TTA89
- Start date
F
Finalygotabeltfed
Mike,
The stock you have pictured looks pretty nice. If you can't find a stock, use a good wood filler to fill the hole and re drill it for the screw. I've used Elmer's Wood Glue and sawdust mixed into a thick fairly dry paste and packed it into the holes on one of mine. Its still holding.
The stock you have pictured looks pretty nice. If you can't find a stock, use a good wood filler to fill the hole and re drill it for the screw. I've used Elmer's Wood Glue and sawdust mixed into a thick fairly dry paste and packed it into the holes on one of mine. Its still holding.
Agreed seems silly to replace an entire stock because 1 screw came out...I'v had a similiar problem before, "fixed" it with a dab of wood glue and a wooden match stick...
45collector
NES Member
The top screw on my MAK90 did the exact same thing. Pack that sucker with wood filler, give it time to harden and start the screw in again. Make sure you're in straight of course.
radioman
NES Member
I concur!!
The issue is that the top screw snapped off into the stock. I have tried to drill it out and broke 3 drill bits already, if I can get the thing out I'll fill it in and re-screw it together. I'm just pissed off at this point and I figured if someone had an extra stock I'd buy it. 
F
Finalygotabeltfed
The issue is that the top screw snapped off into the stock. I have tried to drill it out and broke 3 drill bits already, if I can get the thing out I'll fill it in and re-screw it together. I'm just pissed off at this point and I figured if someone had an extra stock I'd buy it.
Can you grip it with a pair of diagonal cutters?
F
Finalygotabeltfed
Try here.....the color doesn't look the same though.
http://www.akfiles.com/forums/showthread.php?t=70703&highlight=thumbhole+stock
http://www.akfiles.com/forums/showthread.php?t=70703&highlight=thumbhole+stock
I have one I'm willing to part with. Proof of $50 or more donation to either JPFO or GOA and it is yours, I will cover shipping. **NOTE* I do not have the bottom screw, that went with the AK I had. Top screw is included, bottom screw hole is fine. Takes a standard AK grip screw.
