-
If you enjoy the forum please consider supporting it by signing up for a NES Membership The benefits pay for the membership many times over.
-
Be sure to enter the NES/Pioneer Valley Arms February Giveaway ***Smith & Wesson SD9VE 9MM***
Gunsmith
- Thread starter Moderator
- Start date
Looking for a GS that's comfortable working on an AK. I built an AK from a parts kit a while back but forgot to install the site rail during the process. Need the rear trunion rivet drilled out and the rail installed. I have all the hardware, just need the labor (no tooling here unfortunately).
Could anyone recommend a good gunsmith in southern Maine or coastal New Hampshire? I need to get a muzzle brake welded and two triggers (in different guns 
) installed.
) installed.
Any gunsmiths near wayland that bead blast? Looking to refinish a stainless sig.
mikey98e
NES Member
Call David @ http://www.saxonvillearmory.com He might do that work. He is tops for gunsmithing.
-mike
-mike
Shield Firearms I had night sites put on by Steven King, good guy and prices seem to be about average. He is really good about meeting if you have a rough schedule. 508-269-2916
Evolution Armory
350 Rt 108 3B
Somersworth NH
http://Www.evolutionarmory.com
Gun, ammo and accessories sales plus 1911, Sig and AR 15 gunsmithing and refinishing.
350 Rt 108 3B
Somersworth NH
http://Www.evolutionarmory.com
Gun, ammo and accessories sales plus 1911, Sig and AR 15 gunsmithing and refinishing.
DarkHorse Gunsmithing. they are located in South Hadley......phone # is 413 992 6357. This is a fairly new shop. It is run by 3 men....Max, James, and Bill. I just had a shotgun repaired there and the turn-around time was 1 week. The staff there are very pleasant and knowledgeable in regards to their business. I believe that they are a member here on the forum. If you need a gunsmith in Western Ma stop in and check them out. I dont think you will be disappointed with what you find.
bob
bob
We are located in Walpole, MA. 1776 Gunsmithing. Most of our services are listed on our website at www.1776gunsmithing.com. We have 5 full time gunsmiths who graduated from the Colorado School of Trades. Stop by the shop and check us out.
-Don
-Don
I'm looking for a gunsmith to help finish my AR build near Braintree,MA. I need a FSB without the bayonet lug, handguard cap, and a muzzle break pinned and welded. Any suggestions?
I have a 1903a3 Smith Corona that needs the barrel re indexed. Anyone know of a Smith that can do it ? The closest I could find was Colorado and I am really not comfortable shipping it.
- Joined
- Jan 11, 2016
- Messages
- 3
- Likes
- 0
He is - He installed an Apex trigger kit in my Shield 9mm about 5 months ago, still working hard since then. He did a pretty decent job; a few scuffs that could have been avoided with more delicacy on the punch next to the pin, and he also kind of tried to talk me out of getting what I wanted (he was only trying to save me money, but I had already ordered the parts and just wanted the service without coming to a 'concensus'). If you're cool with quick turn around time but from a guy a little rough around the edges who may try and add his 2 cents, then Sergey is definitely a viable option.
413guy
NES Member
resurrecting an old thread but still relevant and wanted to share
he has been mentioned before, western mass, Palmer
K.L. Hooton Gunsmithing
36 Fern Hill Road
Palmer, MA 01069
413-283-9975
I had keith drill the barrel of an ar build I had started a while back but never got around to completing because of the gas block I was using needed to be drilled and I couldn't do it myself. He was quick turnaround, pleasant to deal with, and very reasonable on his price. Nice to have found another gunsmith in the western mass area. Thanks keith, I'll be a return customer should the need arise again!
quick pic of the build, m16a1 clone, uses a pinned gas block, not screws like all these low profile ones these days
he has been mentioned before, western mass, Palmer
K.L. Hooton Gunsmithing
36 Fern Hill Road
Palmer, MA 01069
413-283-9975
I had keith drill the barrel of an ar build I had started a while back but never got around to completing because of the gas block I was using needed to be drilled and I couldn't do it myself. He was quick turnaround, pleasant to deal with, and very reasonable on his price. Nice to have found another gunsmith in the western mass area. Thanks keith, I'll be a return customer should the need arise again!
quick pic of the build, m16a1 clone, uses a pinned gas block, not screws like all these low profile ones these days
- Joined
- Apr 15, 2016
- Messages
- 9
- Likes
- 1
Any suggestions for a gunsmith who does good S&W revolver work in the greater Boston area? Looking to have trigger work done on a 686, hammer bobbed and sights installed. Possibly some work on a model 617 also
Sent from my SAMSUNG-SM-G925A using Tapatalk
Sent from my SAMSUNG-SM-G925A using Tapatalk
cfbackrow
NES Member
I've had great results with Santurri in N. attleboro
- Joined
- Feb 26, 2005
- Messages
- 57,085
- Likes
- 21,282
I had Greg Derr work on my Wife's S&W 64 and my S&W 642.
- Joined
- Apr 3, 2017
- Messages
- 7
- Likes
- 3
Thanks!
We are both classically trained pistol-smiths, and we offer a wide variety of services on Smith Revolvers and SIG handguns. If you are around the South Shore, we would be happy to help.
