Mass Compliant Sig P320??????

yanici said:
If that's the case, and it well could be, then the MA guns will need grips with the cut out in them so that the safety can fit on the gun. I would think that finding different sized grips to swap a bit more difficult due to the fact that most grips made will be for free staters and not have a cut out.
Click to expand...

or avoid all that crap and just get one without the safety to begin with...
 
Heard rumor from a fairly good source that there was a new hold up with the MA P320 and it might mean the MA version has a different frame with the serial marked on the grip not the trigger assembly and that there will be a manual non-trigger safety but the actual trigger will be the same free-state trigger.


Sent from my iPhone using Tapatalk
 
GeorgetownLTC said:
Heard rumor from a fairly good source that there was a new hold up with the MA P320 and it might mean the MA version has a different frame with the serial marked on the grip not the trigger assembly and that there will be a manual non-trigger safety but the actual trigger will be the same free-state trigger.


Sent from my iPhone using Tapatalk
Click to expand...

That's sounds like a completely asinine rumor. The Fire Control Unit is the firearm according to the manufacturer and the ATF, Sig would be better off telling MA to go screw it self and not selling the 320 in the Commonwealth.
 
noxin said:
That's sounds like a completely asinine rumor. The Fire Control Unit is the firearm according to the manufacturer and the ATF, Sig would be better off telling MA to go screw it self and not selling the 320 in the Commonwealth.
Click to expand...

I agree it would be very strange and it would ruin the main selling point of the gun, but that's what I was told, correct or not.
 
noxin said:
That's sounds like a completely asinine rumor. The Fire Control Unit is the firearm according to the manufacturer and the ATF, Sig would be better off telling MA to go screw it self and not selling the 320 in the Commonwealth.[/QUOTE. To meet the completely asinine AG requirements.
Click to expand...
 
yanici said:
If that's the case, and it well could be, then the MA guns will need grips with the cut out in them so that the safety can fit on the gun. I would think that finding different sized grips to swap a bit more difficult due to the fact that most grips made will be for free staters and not have a cut out.
Click to expand...

If the safety is easy to remove from the FCU this is basically a non issue. Hopefully the FCU with the safety isn't radically different from it's real world counterparts.

-Mike
 
GeorgetownLTC said:
Heard rumor from a fairly good source that there was a new hold up with the MA P320 and it might mean the MA version has a different frame with the serial marked on the grip not the trigger assembly and that there will be a manual non-trigger safety but the actual trigger will be the same free-state trigger.
Click to expand...

You would think after HK demonstrated with the VP9 you don't need to do this nonsense to sell in MA, that Sig would wise up.
 
Varmint said:
You would think after HK demonstrated with the VP9 you don't need to do this nonsense to sell in MA, that Sig would wise up.
Click to expand...

HK probably does have that nonsense (the "hidden" serial number) as part of its design and didn't have to do anything special for MA... Sig used to do stupid shit like print it on the bottom of the well were the locking block is inside the frame, so much for hidden... [laugh]

-Mike
 
Varmint said:
You would think after HK demonstrated with the VP9 you don't need to do this nonsense to sell in MA, that Sig would wise up.
Click to expand...
Doesn't Sig have Mass specific models? Something like a P226M vs a P226 for any other state. I don't know that HK (or any others) does that and think Sig may have allowed "this nonsense" an opportunity to become a problem by doing so.
 
Dan229 said:
Doesn't Sig have Mass specific models? Something like a P226M vs a P226 for any other state. I don't know that HK (or any others) does that and think Sig may have allowed "this nonsense" an opportunity to become a problem by doing so.
Click to expand...

Sigs base design doesn't include an LCI or a hidden serial number. So they have to "add" that stuff on the M's for the CMR940 bullshit. Vendors like HK and Ruger probably just engineer that BS into the design so the only difference ends up being the cripplemags that get shipped with the gun... makes SKUs and logistics easier.

-Mike
 
tripper said:
Sig told me again todsy that there is no safety planned for the MA model
Click to expand...

knobdy said:
Are you talking to the pro shop? Because I called yesterday and they said the exact opposite...

Sent from my XT1254 using Tapatalk
Click to expand...

I was there, in Exeter, on Tuesday and was told that the MA 320 will have a safety and that allowed Sig to leave the trigger pull alone so it will stay as nice as the free state triggers.
 
Dan229 said:
Any chance the "safety" is the the tabbed safety trigger that Sig advertises for the 320?
Click to expand...

When I called the guy on the phone said it was a Thumb Safety. If they can find a way to put a thumb safety on a trigger, I def don't want it.

[rofl]

Part of me wants to wait and see how this all turns out before completely writing this gun off. In the mean time, I'm going to head up to Granite state to see if I can fire a VP9, PPQ, and P320 side by side (by side) to see what works best for me.
 
Manual safety don't bother me since I have them on my other carry guns and I'm used to operating them. The drawback that gets me is that replacement frames for guns with safety will be difficult to find.
 
knobdy said:
I have no idea what I just watched. But I liked it....

Anyone hear/check for updates on the MA version lately?

Sent from my XT1254 using Tapatalk
Click to expand...


One of the great YouTube personalities. Unfortunately he has MS & had to retire from YT.
 
what is this fascination with a "MA version". I do not understand.
find an FFL to transfer the thing. buy it and have it transferred. end of story.

- - - Updated - - -

bigblue said:
One of the great YouTube personalities. Unfortunately he has MS & had to retire from YT.
Click to expand...

Dugan was hilarious. some of his videos are priceless. i like his one on the daewoo korean pistol.
 
Squib308 said:
what is this fascination with a "MA version". I do not understand.
find an FFL to transfer the thing. buy it and have it transferred. end of story.

- - - Updated - - -



Dugan was hilarious. some of his videos are priceless. i like his one on the daewoo korean pistol.
Click to expand...
Well I'm a newer shooter and as such don't have any relationships with any FFLs in the area. I've called 4 or 5 and asked them what they knew about the P320 and if I'd be able to order one or transfer one through them and they all said not until the MA version came out.

My apologies for my ignorance.

Sent from my XT1254 using Tapatalk
 

Similar threads

MA Compliant question..
Replies
11
Views
657
drgrant
drgrant
Sig Sauer Infinite Guarantee
Replies
10
Views
395
Admin
Admin
Offset Iron Sights?
Replies
0
Views
44
ktegra
ktegra
Anyone shooting a Sig P320Max?
Replies
2
Views
271
Dan S
D
Anyone got the new Sig P365 Fuse?
Replies
19
Views
1K
Coyote33
Coyote33
Back
Top Bottom