Mil-spec upper receivers Frankensteins

Joined
Sep 19, 2019
Messages
19
Likes
1
Location
Oviedo, Florida
Feedback: 0 / 0 / 0
2D74586A-336E-491D-B3ED-EA6D909D6836.jpeg 7D893435-B4EE-4A0B-849A-AA9F29DB771A.jpeg 3CED9EFC-0969-4653-A31C-F6B2DA713372.jpeg 0FB42D3E-4CAA-47E7-A0A9-FC9C38233F94.jpeg 931E2D71-B39A-4502-9DBB-756003A4A0B7.jpeg I happened upon a Capco A2 upper receiver and paired it with a psa stealth Lower. The psa lower had a bad finish but my friend duracoated them colt grey and it’s gorgeous. The upper and lower fit like a glove. If you see a capco upper buy it. Now my friend wants one and we do a search of gun broker every morning.
 

Attachments

  • 36F61580-9752-4792-86E8-30CC6355C29D.jpeg
    36F61580-9752-4792-86E8-30CC6355C29D.jpeg
    133.3 KB · Views: 2
Could just mean a wild swing in quality, shooter ability, or both. Build looks good though...

Did find this at Ohio Ordinance Works: CAPCO M16A2 Upper

CAPCO M16A2 Upper
$365.00

Out of stock

Description
Capco M16A2 uppers in very good used condition. The barrel is marked “P MP 5.56 NATO 1/7” and on the carry handle above the rear sight it is marked “P A” (Capco’s mark). These uppers were manufactured under military contract in the late 1990’s to upgrade the US Coast Guard’s and the US Air Force’s M16a1s to M16A2s with part sets supplied by Capco. The uppers are genuine USGI used military surplus and are quite rare. The pictures are representative of the upper that you will receive, although yours will vary in minor condition details. The Uppers come complete with used USGI bolt carrier groups and used charging handles.

Specifications:

  • Barrel Length: 20″
  • Gas System: Rifle length
  • 1:7 twist rate
  • Chrome Lining: Yes
  • Muzzle Thread: 5/8-24
  • Chamber: 5.56×45 NATO
  • Gas Block: Standard Front Post gas block/sight
  • Muzzle Device: A2 Flash Hider
  • Handguard Type: black plastic mil-spec
  • Military Issue M16 bolt carrier group
 
Last edited:
View attachment 304168 View attachment 304167 View attachment 304165 View attachment 304162 View attachment 304166 I happened upon a Capco A2 upper receiver and paired it with a psa stealth Lower. The psa lower had a bad finish but my friend duracoated them colt grey and it’s gorgeous. The upper and lower fit like a glove. If you see a capco upper buy it. Now my friend wants one and we do a search of gun broker every morning.
what size squares on that target?
 
It depends on which range I can do. Really want to do the shooters world indoor 100 yard range but they don’t allow green tips, it wouldn’t be a fair comparison yes it really is 100 yards. It’s going to be a while before I do this ammo test I did an order and only hornaday rounds came in. The rest aren’t in supply yet. Shooters World | Orlando Indoor Shooting Range & Gun Store. I built an fn chf 20 inch with a 9 power. I’m thinking that would be the 100 yard test.
 

Attachments

  • BFB7EF2C-550F-45E4-A29C-F4E7F8738B42.jpeg
    BFB7EF2C-550F-45E4-A29C-F4E7F8738B42.jpeg
    61.5 KB · Views: 3
  • C3634533-69D5-4F92-B858-79E2C3D7AE2A.jpeg
    C3634533-69D5-4F92-B858-79E2C3D7AE2A.jpeg
    67.9 KB · Views: 3
  • 0BA16A15-74F5-4012-92A2-9DDFD2B7DE29.jpeg
    0BA16A15-74F5-4012-92A2-9DDFD2B7DE29.jpeg
    61 KB · Views: 2
Last edited:
Back
Top Bottom