Saiga 308 conversion I used a rpk stock set and WASR gas tube. the lower handguard retainer was too big so I cut a curved piece off a upper gas tube clip...welded it inside the lower retainer and made a shallow barrel notch to make sure the the handguard sat level. The muzzle had quite the taper to it and threading was not an option without milling down the barrel so I welded a PKM flash hider to the fsb. for trigger I used an AKT as you will notice a gIt runs like a sewing machine! I used a 1947 Russian Ruble under the shellac on the stock to add a little character.
