So playing around with my cheap Wasr tonight. Pushed in the sight pin that hold in the muzzle brake. Must have pushed a bit to hard cause some brown nasty stuff came out and now the pin is stuck. Anyone have any idea on how to get it out?
-
If you enjoy the forum please consider supporting it by signing up for a NES Membership The benefits pay for the membership many times over.
-
Be sure to enter the NES/Pioneer Valley Arms February Giveaway ***Smith & Wesson SD9VE 9MM***
Ak muzzle brake pin stuck
- Thread starter tacticalpanda
- Start date
I would soak it with solvent, brake cleaner, etc... or hit it with a hammer. Maybe both. Try tapping on the cross pin that holds the muzzle brake retainer and spring in the FSB.
Worst case, drive out the cross pin, take the whole assembly apart, clean it good, and put it all back together.
Worst case, drive out the cross pin, take the whole assembly apart, clean it good, and put it all back together.
Thanks, Just gave it a soak now. Gonna let it sit for a bit then will try the hammer. If all else fails will go after the cross pin.
