Just curious if anyone has ever had issues removing the mag tube? I've tried everything. Even a pipe wrench didn't work. Looks like it may be on there with thread lock?![[rolleyes]](/xen/styles/default/xenforo/smilies.vb/042.gif "Roll Eyes [rolleyes]")
-
If you enjoy the forum please consider supporting it by signing up for a NES Membership The benefits pay for the membership many times over.
-
Be sure to enter the NES/Pioneer Valley Arms February Giveaway ***Smith & Wesson SD9VE 9MM***
Mossberg 500 magazine tube.
- Thread starter wasralex22
- Start date
No. It doesn't look like it. I'll check again but, I'm pretty sure it just tight in there with thread lock.
GPP
NES Member
Look for a crimp maybe?
For some odd reason i thought mine was either pinned or crimped, ill check cause now im curious
Ok just gave mine the once over, it just appears to be threaded as well, no pinny no crimpy. Maybe throw some heat at it?
For some odd reason i thought mine was either pinned or crimped, ill check cause now im curious
Ok just gave mine the once over, it just appears to be threaded as well, no pinny no crimpy. Maybe throw some heat at it?
Last edited:
I checked. Mines is a 590. But, no cringe or pin. I can see the "red" Aftermath of lock tight.
It's a 590. It's a persuader version.
warwickben
bubba Kalashnikov
Heat and dirt if it's been used .
Soak it with some thing like wd40 or sea foam. Then use a strap wrench .
Sent from my iPhone using Tapatalk
Soak it with some thing like wd40 or sea foam. Then use a strap wrench .
Sent from my iPhone using Tapatalk
Dadstoys
NES Member
Try standing it up and working some break free or wd40 into it.
Give it a little bit every day for a week.
Then a strap wrench.
It will come but they can be an sob.
My older one, I cut a slot in the top so I could use an old choke tube wrench to unscrew it.
Give it a little bit every day for a week.
Then a strap wrench.
It will come but they can be an sob.
My older one, I cut a slot in the top so I could use an old choke tube wrench to unscrew it.
warwickben
bubba Kalashnikov
When I got my moss from my friends dad it sat in a case for like 15 years . I had to have it standing up side down with the adjustable choke in wd40. Once I got that choke to break free it was easy to adjust .
Sent from my iPhone using Tapatalk
Try a heatgun around the threaded area. The thread locker they use is tough stuff.
http://us.henkel-adhesives-blog.com/post/All-About-Threadlockers/How-to-Remove-Red-Threadlocker/
If they used the bearing locker it will be even tougher.
http://us.henkel-adhesives-blog.com/post/All-About-Threadlockers/How-to-Remove-Red-Threadlocker/
If they used the bearing locker it will be even tougher.
Try a heatgun around the threaded area. The thread locker they use is tough stuff.
http://us.henkel-adhesives-blog.com/post/All-About-Threadlockers/How-to-Remove-Red-Threadlocker/
If they used the bearing locker it will be even tougher.
http://us.henkel-adhesives-blog.com/post/All-About-Threadlockers/How-to-Remove-Red-Threadlocker/
If they used the bearing locker it will be even tougher.
is it a 500 or a 590?
persuader is a 500 model...
i cranked the tube off of my 590 relatively effortlessly--i also didn't care if i ****ed it up so i just wrapped it in a rag and clamped a vice grip to it and pow! twisted that bad boy right off.
