Soundwave
NES Member
I missed that it was some fancy zero recoil. I have their PCC trigger and it's very nice.
-
If you enjoy the forum please consider supporting it by signing up for a NES Membership The benefits pay for the membership many times over.
-
Be sure to enter the NES/Pioneer Valley Arms February Giveaway ***Smith & Wesson SD9VE 9MM***
My Guns Thread from start to future
- Thread starter DarkJoker33
- Start date
This was the video that convinced me to try it
View: https://youtu.be/MF5Spu8gUfA?si=Q2zwCTQnxwVhpuCk
I'm sold on triggertech. I'll never use anything else for my rifles
300 black done
1st sbr
Parts list
Sharps bros livewire lower
Sharps bros badlands muzzle device
2A armament palouse lite upper receiver
Midwest industries sp series handguard
Triggertech duty 3.5 lb 2 stage trigger
Triggertech 45/90 safety
Phase 5 bad lever
V seven titanium trigger pins
Strike industries takedown pins
Strike industries buffer tube
Strike industries dust cover
Strike industries forward assist
Battle arms development extended mag release
Pws ratcheting castle nut and plate
Dpms systems buffer(carryover part)
Springco carbine spring normal(carryover part)
Streamlight tlr1 hl and pressure pad(carryover part)
Fab defense ag43 grip(carryover part)
Fab defense glcore stock
Fab defense front handstops
Devildog concepts hard charger
Jacob grey 10.5 barrel (replaced with shaw 9.5)
Luth ar stainless pistol gas tube
Velocity triggers adjustable gas block
Velocity triggers recoilless bcg
Sig Sauer Romeo 4H
Knock off unity riser
Amazon cable management clips
1st sbr
Parts list
Sharps bros livewire lower
Sharps bros badlands muzzle device
2A armament palouse lite upper receiver
Midwest industries sp series handguard
Triggertech duty 3.5 lb 2 stage trigger
Triggertech 45/90 safety
Phase 5 bad lever
V seven titanium trigger pins
Strike industries takedown pins
Strike industries buffer tube
Strike industries dust cover
Strike industries forward assist
Battle arms development extended mag release
Pws ratcheting castle nut and plate
Dpms systems buffer(carryover part)
Springco carbine spring normal(carryover part)
Streamlight tlr1 hl and pressure pad(carryover part)
Fab defense ag43 grip(carryover part)
Fab defense glcore stock
Fab defense front handstops
Devildog concepts hard charger
Jacob grey 10.5 barrel (replaced with shaw 9.5)
Luth ar stainless pistol gas tube
Velocity triggers adjustable gas block
Velocity triggers recoilless bcg
Sig Sauer Romeo 4H
Knock off unity riser
Amazon cable management clips
Last edited:
The Usual Suspect
NES Member
Terminator reference
CWulf
NES Member
Joke. Terminator reference.
Got the remaining pieces for the Smith today and finished it up for now.
So last week I rented some 300 blackout headspace gauges.
Got them in and checked it with 2 bolts.
Found out of spec.
Contacted the maker and they sent me a label to send it to them for inspection.
Ordered a new barrel from my favorite manufacturer shaw custom barrels as they had a contract over run.
So I went from a 10.5 with a 1:7 twist to a 9.5 with a 1:5 twist.
Headspace checked it. And was perfect.
Reassembled it and painted it yesterday.
Got them in and checked it with 2 bolts.
Found out of spec.
Contacted the maker and they sent me a label to send it to them for inspection.
Ordered a new barrel from my favorite manufacturer shaw custom barrels as they had a contract over run.
So I went from a 10.5 with a 1:7 twist to a 9.5 with a 1:5 twist.
Headspace checked it. And was perfect.
Reassembled it and painted it yesterday.
MaroonedinMA
NES Member
If they ever actually get serious about this new registration nonsense, everyone else is gonna have to produce receipts and FA-10’s
You can just print this thread.
You can just print this thread.
It's not a suppressor.
Sharps badlands muzzle device
If we didn't live in commiechusetts, it'd be a surefire rc2
And backpack if I ever deem nessesary
Ammo id help.
I traded an optic for ammo a while back and I'm curious what it is beyond the info on the box
Do I need to take it apart and weigh it to determine?
I traded an optic for ammo a while back and I'm curious what it is beyond the info on the box
Do I need to take it apart and weigh it to determine?
![[rolleyes]](/xen/styles/default/xenforo/smilies.vb/042.gif "Roll Eyes [rolleyes]")
I mean, a company did it as a joke for April fools. But no. It's the same as a unity riser, but a knock off
Way more comfortable for my neck and back rather than scrunching down to get it in eyeline.
chris_1001
NES Member
You are obviously not a no neck Italian lol
Nope. I hurt my neck a while back. So when I tried the other riser and flip to center magnifier knock off mount, it felt so nice.
I may try taller mounts for my scopes. Gotta find cheap ones first to see if expensive ones will be worthy
New to me parts.
For my APX. Ever since I saw it in its full oem fde setup, I've wanted one. And because of PSR (print shoot repeat) on YouTube made a Instagram reel of a certain company,my want became a reality without having to buy a whole new gun.
It's worn used parts ready for plug and play.
It'll be my little project for tonight.
For my APX. Ever since I saw it in its full oem fde setup, I've wanted one. And because of PSR (print shoot repeat) on YouTube made a Instagram reel of a certain company,my want became a reality without having to buy a whole new gun.
It's worn used parts ready for plug and play.
It'll be my little project for tonight.
Swap complete
Another addition. The same place that had the FDE parts for my APX had a full size slide kit that came in. More expensive than the FDE, cheaper than buying a whole gun.
Condition of the kit was far better than the FDE.
Little to no slide and grip "damage" .
All the frames and slides
Then I had a grey full size grip and barrel from earlier experimenting with the centurions
Next steps rdo cuts for the 3 slides and a flashlight and holster
Condition of the kit was far better than the FDE.
Little to no slide and grip "damage" .
All the frames and slides
Then I had a grey full size grip and barrel from earlier experimenting with the centurions
Next steps rdo cuts for the 3 slides and a flashlight and holster
a slightly trickier part that may deserve a response is how to decode of what is above.
List of military headstamps - Wikipedia
Finished up my S&W MP 9 project
Align tactical gas pedal
HIVIZ fiber optic green sight
Holster
And the whole reason why I started the project
Leupold deltapoint micro red dot
Have to zero at later date
Align tactical gas pedal
HIVIZ fiber optic green sight
Holster
And the whole reason why I started the project
Leupold deltapoint micro red dot
Have to zero at later date
So smith and wesson with my m&p9 corrupted me with the grip and angle.
When the MP15 sport 3 came out, they advertised it with pretty much the same grip as the M&P9.
They finally released the unobtanium grip to the public with the palm swell straps.
So I picked up 2 to try out.
It's a straighter profile than my fab defense and definitely way more texture. Also shorter.
When I built the 300 blackout, I forgot to add a part in. So I did that as well.
The stern defense Rab-AD.
Since we can't technically have folders.
And last but not least. I changed my 92fs from a da/sa to a single action for shits and giggles.
When the MP15 sport 3 came out, they advertised it with pretty much the same grip as the M&P9.
They finally released the unobtanium grip to the public with the palm swell straps.
So I picked up 2 to try out.
It's a straighter profile than my fab defense and definitely way more texture. Also shorter.
When I built the 300 blackout, I forgot to add a part in. So I did that as well.
The stern defense Rab-AD.
Since we can't technically have folders.
And last but not least. I changed my 92fs from a da/sa to a single action for shits and giggles.
