Reloading Component Trading Thread - Please Read the Rules In the OP Before Posting

[EddieCoyle]

This thread sort of died out, and since we have a trading thread in the classifieds, I'm going to close it.

1. One post per person. When your inventory changes, edit the post. If you're out of brass/bullets/etc at the moment, leave the post and put something like "No components at this time". If you post more than once, all of your posts will be deleted.
   
   
2. No discussion. Please use PM for all communications. Any post without a list of components in it will be deleted.
   
   
3. Trades only, no sales. If you want to sell stuff, sign up with a membership and use the classifieds.
   
   
4. No junior moderators. If someone breaks the rules, either trust me to find it eventually, or PM me. Don't post in the thread.

The old Brass Trading thread had over 500 posts and there weren't 500 people trading brass. We'll try it this way.

ETA: Use this thread for trading reloading components only. Please don't try to trade off your loaded ammo or gear, guns, etc. If you do, I'll edit your post or delete it entirely if I'm in a bad mood. We don't want this to become a way to skirt the membership requirement for the Classifieds.

 

[Marcus5aurelius]

I figure I'll start this brand spanking new thread out.

Updated 8/05/12

I have lots of: (All tumbled clean)
40
9mm
.380
5.56/.223
30-06
38spl
Limited Quantities of:(All tumbled clean)
264 Win Mag-19 pieces (primed)
338 Win Mag-71 pieces (32 primed)
300 Win Mag -41 (21 primed)


I'm looking for:
Primers-All kinds
Powders-H110, 5744, VV N340
338 Lapua
338 Edge (or 300 RUM)
458 SOCOM
50 Beowulf
45-70
50ae
7.5x55 swiss
7.62x54r
8mm mauser
.303 brit
7.7 Jap

Also may be interested in some machine gunned .308 that you're trying to get rid of. (alternative to scrapping)

I will also trade brass for components: powder (H110, 5744, VV N340) primers, gas checks, or anything you have lying around of interest.

Thanks,
Mark

 

[tele_mark]

WTT -- .380 Bullets for 9mm bullets -- approx 800 -- Large Rifle Primers

I bought 1000 X-treme 100 grain RNFP copper plated bullets for a gun I was going to buy, but instead went with a 9mm gun. I loaded about 100 as 9mm's, but didn't like the performance -- I had to hold way lower on the target than I like.

Want to trade even quantities for 115 grain and up 9mm bullets. Will split into smaller lots.

I am in Leominster, MA and will try to meet or will ship.

EDIT: I have 800 Winchester Large Rifle Primers, the remainder of a box of 1000. WTT for small regular or magnum pistol primers, large pistol primers, or 9mm, .357, or 45ACP bullets.


When ammunition, magazines or other regulated items are sold/bought or traded as part of this transaction, I agree to follow all applicable local, state and federal laws and regulations pertaining to these items.

 

[DukeInFlorida]

Updated 10/2/12

Have the following that I can trade......

I have:
.22 cal aluminum gas checks - can make as many as you want
.30 cal aluminum and copper gas checks- ditto
.44 mag alum and copper gas checks - ditto
.500 S&W Mag alum and copper gas checks - ditto

Cast lead bullets:

30 cal
44 mag
500 mag
.40
9mm


I have many styles on these, and can provide them in as-cast condition, or sized to your needs. Many of the molds are gas check style.
I also have the ability to swage 44 magnum (250 grain) exact equivalents for the Hornady XTP (make these from .40 S&W cases)
Ditto on .40 bullets swaged from 9mm brass (165 grain).

Side by side they are the same as Hornady XTP's.


Always looking for brass:
45 Long Colt
454 Casull
45-70
357 Mag
44 mag
44 Special
7.62 X 54R

 

[Bendad97]

UPDATED 10-30-12


I HAVE:

PISTOL BRASS:

.30 Luger, 1 Piece, Inspected & Tumbled.
.38 S&W, 3 Pieces, Inspected & Tumbled.
.38 Long, 15 Pieces, Inspected & Tumbled.
.45 G.A.P., 47 Pieces, Decapped & Tumbled
.45 Win.Mag., 4 Pieces, Inspected & Tumbled.
10MM, 2 Pieces, Inspected & Tumbled.



RIFLE BRASS:

.204 Ruger, 15 Pieces, Hornady Headstamps, Inspected & Tumbled.
.220 Swift, 45 Pieces, Inspected & Tumbled.
.250 Savage, 1 Piece, Inspected & Tumbled.
.250 HP, 26 Pieces, Inspected & Tumbled.
.250-3000, 4 Pieces, Inspected & Tumbled.
.270 Weatherby. Mag., 5 Pieces, Inspected & Tumbled.
.275 H&H Mag., 2 Pieces, Inspected & Tumbled.
.280 Rem., 17 Pieces, Inspected & Tumbled.
.300 H&H Mag., 13 Pieces, Inspected & Tumbled.
.303 Savage, 3 Pieces, Inspected & Tumbled.
.308 Marlin Express, 7 Pieces, Inspected & Tumbled.
6.5x55, 4 Pieces, Norma Headstamps, Inspected & Tumbled.
7.62x39, 5 Pieces, Civilian Headstamps, Inspected & Tumbled.
7MM Mauser, 18 Pieces, Civilian Headstamps, Inspected & Tumbled.
8MM Mauser, 19 Pieces, Civilian Headstamps, Inspected & Tumbled.
8x58R, 18 Pieces, BB Headstamps, Australian, Inspected & Tumbled.


OTHER COMPONENTS THAT I HAVE TO TRADE:

12 GA Once Fired Hulls, Low Brass, Winchester 2 3/4", 1OZ Shot Capacity, Mix of AA Skeet & Game Loads, 60 Pieces
.410 Judge/Governor Pistol Ammo Hulls, Federal & Winchester, 100+/- Pieces
.410 Shotshell Hulls, Various Lengths, 125 +/- Pieces



I NEED/AM OPEN TO:

******LEVER GUN BRASS IN ANY CALIBER******

Other Interesting Brass that you may have, try me. ESPECIALLY INTERESTED IN LEVERGUN BRASS.

****230 Grain FMJ/TMJ/PLATED Round Nose Projectiles for .45 ACP****

 

[Urza2005]

I have:
9mm(1x)
40 S&W(1x)
45 ACP(1x)
38 SPL(1x)
233
5.56

Also: Low quantity of the following. PM me for exact account.

357 Sig, 270 Win,

I want:

44 Magnum
243 Winchester
7.62x54R
444 Marlin
30-30
257 WBY Magnum

I will meet in the Worcester Area, or ship. I will also consider trades for other reloading components, such as primers or bullets.

 

[sieveboy]

I have for trade:

.30-'06 Brass in a variety of conditions and headstamps


I am looking for:

.308 Winchester Brass

I have the full info in the Reloading Classifieds

 

[QRUarmory]

List updated 3/19
I have:
All once fired PISTOL range brass


32 H&R mag +10


357 mag brass + 500
40 S&W 500+ pieces
5.7 X 28mm + 500+ pieces
38 spl 1000+ pieces
50ae +7
44 mag + 400
475 Linebaugh +2
460 Ruger +5
454 Casull +15




All one fired RIFLE range brass

223 ...... 1000+
223 WSSM + 2
270 win + 52
270 win nickel + 27
270 WSM + 12
30/30 + 200 decap and sized
308 brass +126 "no crimp"
30-06 + 67
7mm mag +11
7.62 nagant + 9

7mm utra mag +14
300 win mag +9








Need: 45 long colt brass

 

[wiskie762]

gone

 

[copterdoctor]

Updated 1/15/2012
I have.....

*Approximately* 5 pounds of Alliant 2400 powder.

45ACP brass. Range pickups. About 1500 pieces.

One large coffee can of 40 S&W brass. Range pickups. It's about 11 or 12 pounds of brass. I didn't count them.

The following are bullets (projectiles) only. NOT loaded ammo. All are in old paper boxes.

Description :

45 each 7mm(284) Sierra 140gr spitzer

8mm(323)
39 each Speer 125gr soft point
42 each Sierra 150gr spitzer
100 each Speer 150gr spiitzer

270(277)
100 each Hornady 100gr spire point
42 each Sierra 130gr spitzer
11 each Sierra 110gr spitzer

25(257)
100 each Hornady 100gr spire point
95 each Sierra 117gr spitzer
19 each Hornady 87gr spire point



Looking for:
308 147gr fmjbt (M80) bullets.

308 150gr to 180gr round nose soft point bullets.

223 Rem 55gr or 62gr fmj bullets.

Powders: H335, Accurate 2200, Accurate 2230, Accurate 2460, TAC, RL15.



Statement of Legal compliance:
When ammunition, magazines or other regulated items are sold/bought or traded as part of this transaction, I agree to follow all applicable local, state and federal laws and regulations pertaining to these items.

 

[Patriot]

(Updated 12/29/2012)

I'm always looking for:

1) .327 Federal Magnum Pistol Brass
2) .32 Win Special Rifle Brass
3) .357 Magnum Brass (yellow brass only)
4) Large pistol primers (CCI or Win preferred)

Got some? I have the following to trade and if this isn't what you are looking
for, PM me, and I will find something to trade to your satisfaction.


9mm Brass
.357 Sig Brass
.38 Special Brass (Nickel only)
.40 S&W Brass
.45 Colt Brass
7mm Rifle Brass (4 Pieces)
Miscellaneous holsters (LH & RH) Mostly wheelguns
Miscellaneous grips (Mostly hogue and pac S&W wheelguns)
A lot (~3K) of 38/357 dual bevel base 148gr wad cutters lubed & sized to .358.

 

[rewster]

All traded !!

 

[NavelOfficer]

Excess inventory or unused calibers available: 4 Aug 2012

Starline .44 Russian brass; once-fired, about 400 pieces.
Swap for 125-150 pieces boxer-primed .303 Brit, 7.62x54R, 7.7x58
or GP-11 brass.
.357 SIG brass (mostly Speer, no history), small Flat-Rate box-full.
.222 Remington brass, mixed h/s, no history, small Flat-Rate box-full

Brass traders: Be sure to describe your product (ie berdan-primed vs. boxer-primed, range pickups vs processed, once-fired vs unkown history, etc.) before you end up with any dissatisfied customers!

 

[EddieCoyle]

I have:

• .357 Sig (Speer nickel plated once-fired)
• .38 Special (Mixed once-fired)
• .357 Magnum (Mixed once-fired)
• 10mm (Mixed range brass)
• .223 WSSM (about 10 pieces, once-fired)
• .30-06 (Mostly once-fired)
• .32 S&W Long
• .44-40

I need:

• 6.8 SPC
• .41 Magnum
• .308
• .38 S&W (not .38 Special)
  
  
  
  Please Note:
  I will not trade for brass that has been decapped and/or resized.

 

[Manomet]

1

 

[Lamina]

I have (edited 12/6/2011)

gotta go through my stock and assess again...


A shitload of .223, shitload of 9mm , bunch of .40S&W, bunch of .45ACP. I'm only willing to part with any of these (in red) for my high priority needs...

I need, in order of priority...

.308 brass and projectiles.
.223 projos from 55gn-75gn.
9mm projos from 115gn-147gn
large rifle, small rifle, and small pistol primers.

Always interested in any unused or old dies, tools or accessories.

 

[01bmf]

Have:
About 200 PCS .50 BMG

Looking for:
.308 Brass
Varget
BL-C(2)
Gold
Silver
Cash

17OCT12

 

[Cuda444]

I have:

A (very) conservative estimate of:

30lbs+ of .40 S&W



I would like to trade it for (trade will be very much in your favor if trading the .40 S&W)
9mm brass
45 ACP brass
Small pistol primers
Large pistol primers
Unique powder

PM is best for contacting me

 

[GunGrey]

Traded to dukeinmaine

But I do have some IMR4895 (1pound)

And 1k winchester large rifle primer to trade away

 

[Fooped]

I have:

A large amount of .40 S&W brass (1500+ pieces)
.41 Magnum (Approx. 50 pieces or so) ALL TRADED
.38 Super (Approx 50 pieces) ALL TRADED
.45acp (All tumbled, inspected and sorted for those nasty headstamps that use small pistol primers, approx 500 pieces)

I also have some primers (almost all types) that I can part with if need be.


I need:

10mm
.357 Mag nickle plated

Thanks!

 

[OLD SOB]

26 POUNDS OF .40 CAL PICK-UP BRASS

I have 26 pounds of .40 cal pick-up brass. I want to trade it for a similar amount of .45 ACP pick-up brass. Anybody interested? I'm in CT on the coast 5 minutes from Bridgeport, CT. We could meet at the next pistol match or somewhere nearby.

Brass is getting pretty expensive and reloading is just too fun.

Regards,
Larry

 

[joe1231913]

Updated 6-6-12


I have that I can part with:

Tons of 40 cal brass, once fired
Tons of 9mm brass once fired
100-380 brass casings
30- 357 sig casings



All brass is cleaned, but NOT resized or deprimed.


I need:
30-30 components or dies (brass, projectiles, etc)


Updated on 6-6-12






Located on South Shore. Will need to do a FTF swap as I can not ship primers.

 

[durant7]

As of 5-7-2012

I am looking for 32 S&W "short" or 44 Rem Mag

Rifle brass. All range brass, boxer primed unless noted otherwise.

75 243
64 270 Win
39 303 British. Range pick up...got 39, guess the box and one left with shooter. RP
35 7.62 x 54 (22 NNY, 10 S&B, 3 PPU, all boxer primed)
34 300 Win Mag (14 loaded, 20 bright shiny once fired)
5 7.5 x 55 (5 NNY)

Pistol brass.

150 45 ACP Large Primer (80 R-P, 70 FC)
131 45 ACP Small Primer (100 FC, 29 Speer, 2 CCI)
50+ 38 Special (brass)


Plus the normal suspects 9mm, 40 S&W, 223, 30 cal carbine and other stuff I did not think would be of interest because it is everywhere. If you want a certain qty of a specific headstamp ask and I'll see what it looks like.

In Concord, NH area. If you want specifics on a particular shell please ask.

 

[Ziptar]

Updated: 11-23-2011

Interested in trading for:

• .45 Colt brass (No Nickel Plated, Please)

I Have:

Nothing to trade at the moment.

 

[ooglassoo]

I have some stuff to trade off that I got in a lot of reloading stuff I bought.

I have 50 pieces of 44mag primed and ready to be loaded. Mixed H/S they come in plastic 44 ammo box. PENDING TRADE TO ZIPTAR

I also have 1000 cci 450 small rifle magnum primers. Pending trade to Lamina

Things I'm looking for

Anything I can use for reloading 223rem or 308win.

Bullet puller

 

[snwbrdr435]

Have 900 Small Pistol Magnum Primers
Also have a Gallon Ziplock bag filled with .38 brass not sure if its S&W, Special etc will check in the AM


Need .45ACP Brass

 

[mac1911]

please remove

I have aprox 10lbs .358 dia 158 grain semi wad cutters for reloading 38/357 theses are from http://www.velocitybullets.com/products/.38-Special-158-Grain-Semi-Wadcutter-Sized-to-.358.htm

looking for 10lbs of 200grain semi wad cutters for 45acp

 

[NickW85]

Updated 11/26/12

If you want to know exactly how many or what head-stamps I have feel free to ask and ill look. My numbers on here are just guesses now because I have so much kicking around. I will sell also.

I have:
Brass
9mm 1000+ pieces tumbled mixed brass 1,000+not tumbled mixed headstamp
.40 S&W 600+ pieces tumbled mixed brass
38 Special 267 peices range pickup from my friends gun 50/50 mix nickel plated and brass
357 magnum 47pieces range pickup from my friends gun all nickel plated
6.8 Barret 11 pieces range pickup
30-06 10-20 pieces range pickup
30-30 2 pieces rang pickup
223 200+ once fired
556 200+ once fired
7.8 Warbird Lazeroni 8 pieces
308/7.62 60-70 pieces range pickup

Looking for:
44 Mag Brass and Projectiles
9mm jacketed projectiles
45 ACP Brass and Projectiles
Small and large pistol primers, Powder

 

[ironweld7]

***UPDATED6AUG12***

I have,

60 7MM Mauser 20 w-w super, 20 super speed, 20 super x
55 45 auto-rim looking to trade for 45 Colt


i am looking for .380 auto brass

 

[jaypap]

I have:

200 .380 ACP tumbled

225 pieces .38 Super nickel brass tumbled and primed

15 pieces .300 Win. Magnum Hornady brass

18 pieces WW .45 Win Mag tumbled

I need:

.223 brass

.40 brass

Dillon 45 dies

Powders: Prefer unopened
Winchester 231
Hercules Bullseye
Hercules Unique
Hodgdon Universal Clays

If you need what I have p.m. with what you got.