Sig 320 Flux Legion

cams · Friday at 2:17 PM

My search came up with zero threads or even mentions of this item on NES. I know the search feature sucks here so dupe away and link please if there’s a thread on them.

Now, anyone have one? I have an opportunity to grab one today, but being 320 I’m hesitant to spend any money on it.

Is there any talk about making a ‘suppressor-able’ newer Gen2 version?

If you do see them available in your area what’s the going rate for them now that they’ve been available for a minute?

drgrant · Friday at 2:19 PM

"Bang!!!!!"

View: https://youtu.be/H-7EON43yjc?si=g7YexMZLQAmRKUCa

sorry, couldn't resist

PappyM3 · Friday at 2:21 PM

Never used the “Legion”, but I have a normal Flux Raider (and had a Flux MP17 before that).

It’s an awesome little platform. The original MP17 had some flaws that made it mostly just a range toy. They fixed them for the Raider. It’s a nice PDW. The only downside is the P320 in it.

I doubt they are working on a more suppressable version. That’s all up to the P320. Flux does offer a cover for the back that blocks the iron sights, but keeps gas out of your face when running suppressed. But reliability with a P320 suppressed isn’t great.

Apparently they’re currently working on a new Glock version. Their old Glock version was a hack to work with Glock frames. But the new one, I’m guessing, will use Glock’s Gen 6 FCU setup.

cams · Friday at 2:37 PM

Ya the 320 thing is just not a good selling point.

Masswhole · Friday at 4:45 PM

I like the "not a vfg" molded into where everyone grips like a vfg.
Need a glock switch that reads 'not a glock switch' now.

Looks like there's a 365 version now.

View: https://www.youtube.com/watch?v=iyv6HK7NHkM

DarkJoker33 · Friday at 4:51 PM

Recover tactical makes adapters as well.
Not as "premium" as the flux.
I'm probably going to get one for my M&P in the future

chris_1001 · Friday at 7:49 PM

I might have a flux. Not saying I do. But if I did, it’s pretty cool and I’d be happy if I did.

People if they saw it would wink and say cool.

But I’m just shitposting. Because mura

cams · Saturday at 8:05 PM

chris_1001 said:
But I’m just shitposting. Because mura

Word. I hope if you ever get one you enjoy the ass out of it. For Mara of course.

chris_1001 · Saturday at 8:09 PM

cams said:
Word. I hope if you ever get one you enjoy the ass out of it. For Mara of course.

cams · Saturday at 8:09 PM

ChevyGuy91 · Saturday at 8:21 PM

I think they are neat, but 320.

They have said they are working on a setup for the RXM, and I will probably pick one of those up when they hit the market.

cams · Saturday at 8:55 PM

ChevyGuy91 said:
I think they are neat, but 320.

They have said they are working on a setup for the RXM, and I will probably pick one of those up when they hit the market.

Yep, same, I didn’t buy it.
I refuse to have unruly guns in my bag.

pinefd · Saturday at 10:24 PM

If I had a Flux Legion, it would probably have some modifications done to it and look just like the top one shown here, and if I were to build a Flux from the ground up, it would no doubt look just like the bottom one. And they'd be a hell of a lot of fun to shoot. But I'm just dreamin'...maybe.

(and yes, that may be a Pinty you see on the bottom one, but it's since been swapped out for something else...or so I'm told)

Frank

PappyM3 · Saturday at 12:40 AM

steve8140 · Saturday at 6:44 PM

I have one, it started life as a 320 XVTAC I picked up for cheap. Used the FCU and slide assembly to build it out.

Added a charging handle and a TLR-VIR-II for f***ing around at night. I also have a few 3D printed parts some friends made from charging handles and recently a new brace that give a longer length of pull similar to the stock option.

I’ll be adding a threaded barrel soon so I can use my Obsidian 9 on it.

chris_1001 · Saturday at 6:47 PM

steve8140 said:
I have one, it started life as a 320 XVTAC I picked up for cheap. Used the FCU and slide assembly to build it out.

Added a charging handle and a TLR-VIR-II for f***ing around at night. I also have a few 3D printed parts some friends made from charging handles and recently a new brace that give a longer length of pull similar to the stock option.

I’ll be adding a threaded barrel soon so I can use my Obsidian 9 on it.
View attachment 982422

If I actually had one, you might be to blame…

Shawnyc · Sunday at 10:04 PM

pinefd said:
If I had a Flux Legion, it would probably have some modifications done to it and look just like the top one shown here, and if I were to build a Flux from the ground up, it would no doubt look just like the bottom one. And they'd be a hell of a lot of fun to shoot. But I'm just dreamin'...maybe.

(and yes, that may be a Pinty you see on the bottom one, but it's since been swapped out for something else...or so I'm told)

Frank

Is that a charging handle that attaches to the optic mount? Can you post a link? If I ever get a Flux I may want to look into that some day.

pinefd · Sunday at 10:11 PM

Shawnyc said:
Is that a charging handle that attaches to the optic mount? Can you post a link? If I ever get a Flux I may want to look into that some day.

Yes, there are actually two different charging handles on the two guns and they both work great. There are quite a few different charging handles available now, and the number seems to be growing, although some of them are out of stock. I'll find some links and post them either later tonight or tomorrow.

Frank

jkelly1229 · 2025-04-07T10:55:02-0400

Could you not just get an mpx copper head

Sig 320 Flux Legion

Similar threads