Hey...what's the retail on one of those?
P320 AXG Equinox
Combining the weight and balance of our classic metal-framed pistols with the performance and reliability of the P320.
www.sigsauer.com
If you enjoy the forum please consider supporting it by signing up for a NES Membership The benefits pay for the membership many times over.
Be sure to enter the NES/MFS May Giveaway ***Canik METE SFX***
Hi Maura.If anyone has a full-size 9mm P320 and wants to trade (your) 10rd mags for (my) 15rd mags, please let me know
Joined Nov 7, 2005Hi Maura.
I have my NH pistol & revolver license if you want to see it...Hi Maura.
had I seen this a year ago I gave away 3 10 rounders to a poor SOB that was moving to upstate NYIf anyone has a full-size 9mm P320 and wants to trade (your) 10rd mags for (my) 15rd mags, please let me know
I posted it a year ago but only in the premium sectionhad I seen this a year ago I gave away 3 10 rounders to a pos SOB that was moving to upstate NY
This is basically it. Thanks.Some of us have bug kid pants and don't piss in them if a piece of metal is marked in a way the crown doesn't like. He might be trying to do someone a favor, the 10s are harder to come by and someone who just moved out or doesn't care may have shit 10s they want to unload.
Sig can get bent… just like my brass punch.
What the f*** do they do to their front sights? I tried removing one to install a charging handle for my Flux setup. I used copious amounts of heat from my heat gun, but no use. Sadly, I can’t use my sight pusher tool because of Sig’s rather long recoil spring shroud. Direction doesn’t seem to matter. Lots of people online said remove right to left. But an XS sights video online showed them removing a sight left to right.
I also tried a heavier hammer and a steel punch. No joy.
What have others done to get the damned thing off?
View attachment 552727
When I had that problem on a 10/22, we clamped the barrel under an arbor press...Sig can get bent… just like my brass punch.
What the f*** do they do to their front sights? I tried removing one to install a charging handle for my Flux setup. I used copious amounts of heat from my heat gun, but no use. Sadly, I can’t use my sight pusher tool because of Sig’s rather long recoil spring shroud. Direction doesn’t seem to matter. Lots of people online said remove right to left. But an XS sights video online showed them removing a sight left to right.
I also tried a heavier hammer and a steel punch. No joy.
What have others done to get the damned thing off?
View attachment 552727
Sig can get bent… just like my brass punch.
What the f*** do they do to their front sights? I tried removing one to install a charging handle for my Flux setup. I used copious amounts of heat from my heat gun, but no use. Sadly, I can’t use my sight pusher tool because of Sig’s rather long recoil spring shroud. Direction doesn’t seem to matter. Lots of people online said remove right to left. But an XS sights video online showed them removing a sight left to right.
I also tried a heavier hammer and a steel punch. No joy.
What have others done to get the damned thing off?
Tried it on one of mine as well and didn’t really care for it. Some swear by it, but I felt it just felt unnatural. Ended up selling it here in the classifiedsAnyone try a gas pedal? likes, dislikes?
On sig 1911's the front sights are held in by a roll pin that must be removed first. Not sure about other modelsSig can get bent… just like my brass punch.
What the f*** do they do to their front sights? I tried removing one to install a charging handle for my Flux setup. I used copious amounts of heat from my heat gun, but no use. Sadly, I can’t use my sight pusher tool because of Sig’s rather long recoil spring shroud. Direction doesn’t seem to matter. Lots of people online said remove right to left. But an XS sights video online showed them removing a sight left to right.
I also tried a heavier hammer and a steel punch. No joy.
What have others done to get the damned thing off?
View attachment 552727
CZ75s are like that too, with the sight dovetail running inline with the barrel. It works out really well.On sig 1911's the front sights are held in by a roll pin that must be removed first. Not sure about other models
I used Tactical Dev's parts on my P365. They have these mag extenders that allow you to use standard P365 mags in a P365XL grip. No extra rounds, just extra length. A slightly cheaper alternative to buying new 10rd P365XL mags if doing a conversion, and I can always go back if I want.
They appear to be 3D printed, but with a high grade industrial 3D printer that is as close to vac molding as one can get with FDM. No concerns with delamination.
I ordered some of these - looks like it’ll fix my only complaint with both 365 and XL, the grip could be a little longer in the palm.
The ones I ordered were still flush with the XL grip, but they make a "ledge" version for XL. I thought (could be mistaken) that those required use of the 12rd mags or 10/12 factory limited full length mags.
The XL still doesn't completely fill my palm, but it's far less sharp at the corner of the backstrap than the stock P365 and that hasn't bothered me. I have short fat hands though, so someone wearing an L to XL glove would probably like the ledge extensions.
I had Brad make up the ledge extensions a couple years ago cause my pinky hangs off the XL grip. I prefer the large vs the extended extensions. He makes the ledge extension conversions for the 365 magsThe ones I ordered were still flush with the XL grip, but they make a "ledge" version for XL. I thought (could be mistaken) that those required use of the 12rd mags or 10/12 factory limited full length mags.
The XL still doesn't completely fill my palm, but it's far less sharp at the corner of the backstrap than the stock P365 and that hasn't bothered me. I have short fat hands though, so someone wearing an L to XL glove would probably like the ledge extensions.
Per the 320 Armoers manual: new sight installation from left to right. Removal: direction does not matter. I took the armorers class last week, it was a good classSig can get bent… just like my brass punch.
What the f*** do they do to their front sights? I tried removing one to install a charging handle for my Flux setup. I used copious amounts of heat from my heat gun, but no use. Sadly, I can’t use my sight pusher tool because of Sig’s rather long recoil spring shroud. Direction doesn’t seem to matter. Lots of people online said remove right to left. But an XS sights video online showed them removing a sight left to right.
I also tried a heavier hammer and a steel punch. No joy.
What have others done to get the damned thing off?
View attachment 552727