Here are the rules:
This MUST be a proven load that you are currently using. Data you used several years ago with components no longer made does no one any good.
You MUST list all specifications of the load data.
This includes the following:
Brass manufacturer, and case trim length.
Bullet manufacturer, bullet shape, and weight.
Primers used.
Powder manufacturer, type, and charge weight.
Crimp, yes or no.
OAL of the finished round.
If you are posting reloading data, please double check your post for accuracy, and typos before submitting your final post.
It would be helpful to also include any additional information you are willing to share about the load you are recommending.
RELOADERS:
If you choose to use any of the recipes listed here, you MUST check the data against a current reloading manual from a reputable publisher to ensure it is within their maximum recommended load.
You MUST work your way up to any load recipe you find in this forum. If the recipe is found to be within the specs in your favorite current reloading manual, you should ALWAYS start 10% below any recommended load and work your way up incrementally to the listed recipe (as long as it's within the maximum range), checking for signs of over-pressure along the way.
All off topic posts, or posts without complete data as required above will be deleted. If you want further information about a recipe listed, you must use the PM function to contact the contributor.
Bizarre reloading data, inadvertent typos, or a misplaced decimal point could potentially be catastrophic for the reloader. If you see something that doesn't look right, please contact forum moderators immediately, so the error can be corrected.
Disclaimer:
USE THIS DATA AT YOUR OWN RISK. Northeastshooters.com, it's staff, members, and contributors take NO responsibility for any damage or injury caused as a result from trying any of these posted load recipes. Under NO circumstances does the publication of any specific load on Northeastshooters.com indicate a recommendation, endorsement, or verification of any data published. ALWAYS consult a current commercial reloading manual for acceptable and time-tested reloading data. ALWAYS start 10% below any recommended load and work your way up. ALWAYS follow EVERY safety precaution while reloading. You will be working with EXPLOSIVE material and projectiles. If it doesn't sound right, don't do it. Northeastshooters.com assumes NO responsibility for any loads published or any direct or consequential damages incurred as a result of the use of such data. By using any data published here, you are releasing and indemnifying Northeastshooters.com, its officers, agents, members, and contributors against any and all lawsuits or claims stemming from the use of any such reloading data published or otherwise posted on this web site.
Have fun, and be safe
This MUST be a proven load that you are currently using. Data you used several years ago with components no longer made does no one any good.
You MUST list all specifications of the load data.
This includes the following:
Brass manufacturer, and case trim length.
Bullet manufacturer, bullet shape, and weight.
Primers used.
Powder manufacturer, type, and charge weight.
Crimp, yes or no.
OAL of the finished round.
If you are posting reloading data, please double check your post for accuracy, and typos before submitting your final post.
It would be helpful to also include any additional information you are willing to share about the load you are recommending.
RELOADERS:
If you choose to use any of the recipes listed here, you MUST check the data against a current reloading manual from a reputable publisher to ensure it is within their maximum recommended load.
You MUST work your way up to any load recipe you find in this forum. If the recipe is found to be within the specs in your favorite current reloading manual, you should ALWAYS start 10% below any recommended load and work your way up incrementally to the listed recipe (as long as it's within the maximum range), checking for signs of over-pressure along the way.
All off topic posts, or posts without complete data as required above will be deleted. If you want further information about a recipe listed, you must use the PM function to contact the contributor.
Bizarre reloading data, inadvertent typos, or a misplaced decimal point could potentially be catastrophic for the reloader. If you see something that doesn't look right, please contact forum moderators immediately, so the error can be corrected.
Disclaimer:
USE THIS DATA AT YOUR OWN RISK. Northeastshooters.com, it's staff, members, and contributors take NO responsibility for any damage or injury caused as a result from trying any of these posted load recipes. Under NO circumstances does the publication of any specific load on Northeastshooters.com indicate a recommendation, endorsement, or verification of any data published. ALWAYS consult a current commercial reloading manual for acceptable and time-tested reloading data. ALWAYS start 10% below any recommended load and work your way up. ALWAYS follow EVERY safety precaution while reloading. You will be working with EXPLOSIVE material and projectiles. If it doesn't sound right, don't do it. Northeastshooters.com assumes NO responsibility for any loads published or any direct or consequential damages incurred as a result of the use of such data. By using any data published here, you are releasing and indemnifying Northeastshooters.com, its officers, agents, members, and contributors against any and all lawsuits or claims stemming from the use of any such reloading data published or otherwise posted on this web site.
Have fun, and be safe