reloading 270 WSM

Hi all,
has anyone downloaded the .270 WSM to .270 Winchester velocities?
I have not downloaded 270 Cal.
But I have run many reduced loads in almost everything else
Look into trail boss data see if there’s anything that may be helpful for you

What are you trying to achieve?
 
Last edited:
Your talking maybe 200 fps difference between the 2 loaded at “normal” loads ? The wsm came about to fit the short action guns ,
If your looking for reduced recoil to punch paper try 90 grain bullets with an appropriate powder loaded to the slowest velocity
If you looking to really reduce recoil look into reduced recoil loads with powders like Trailboss. Shooters world buffalo ectect

Also a gun that fits well will help a lot with managing recoil . The pitch of the stock is often “wrong”
Adding some weight helps also.

Comes down to end use really
Punching paper inside 300 yards its easier to just get a 223

Hunting ? I only knew I person shooting 270 win not wsm 130 grain bullet iirc around 3000 fps?
Good to about 350 yards?

You can call powder manufactures for reduced recoil load info
Or subsonic load data

If there data for H4895 for 270 wsm there are reduced load formulas for that powder also .
 
H4895 works well for reduced loads
Here is the directions from Hodgdon.
If you cant find published data for H4895 for your cartridge/bullet dont use it

Follow the instructions

Trailboss is going to really reduce velocities under 2000 fps most likely

Again the ballistics people at the powder manufactures/suppliers are only a phone call away and full of great info
 


Write your reply...
Back
Top Bottom