-
If you enjoy the forum please consider supporting it by signing up for a NES Membership The benefits pay for the membership many times over.
-
Be sure to enter the NES/Pioneer Valley Arms February Giveaway ***Smith & Wesson SD9VE 9MM***
Show us your .308's Semi-Autos
- Thread starter ranger4-7
- Start date
richgetsy
NES Member
Multicam
Wood
NICE!, The wood looks great!
JuergenG
NES Member
Thanks !
stoneypete
NES Member
- Joined
- Nov 1, 2005
- Messages
- 3,903
- Likes
- 425
I'm in love.
![[smile]](/xen/styles/default/xenforo/smilies.vb/001.gif "Smile [smile]")
My H&K SL7, which was my 1st rifle back in '94
and the M1A NM
That one is super!!
You do not see many of those.
Fred
JuergenG
NES Member
Fred, you you mean the SL7 ?
There are plenty around with reservists over here, same as the SL6 (.223 cal).
Unfortunately they don't make these any more.
Has the SL6/SL7 ever been sold in the U.S. by H&K ?
There are plenty around with reservists over here, same as the SL6 (.223 cal).
Unfortunately they don't make these any more.
Has the SL6/SL7 ever been sold in the U.S. by H&K ?
.
I did have a SL7 and sold it!!
That was a great rifle, I do not know if they where imported. But I see one for sale now and again.
Fred
ranger4-7
Army Veteran
Here's my contribution. Yes I know the thumbhole stock has to go. It's going this weekend.
Nice FAL and nice bar!
Thanks! My grandfather made the bar and had it in his house for years. He gave it to me when I bought my first home.
SemiAutoSam
Banned
Here is another one of the builds I'm working on.
A combination Para and Straight stocked Stainless steel DSA FAL.
All I'm missing is the barrel.
A combination Para and Straight stocked Stainless steel DSA FAL.
All I'm missing is the barrel.
Last edited:
namedpipes
NES Member
HK91
Pardon my stained basement floor!
Pardon my stained basement floor!
ranger4-7
Army Veteran
HK91
Pardon my stained basement floor!
Great looking HK! Is that a factory camo job?
namedpipes
NES Member
It is indeed. And preban, too. It was the second gun I ever bought, back in 1987 or so.
The only change to it is a larger stock pad (for it kicks like a mule). I kept the original if I ever want to change it back.
namedpipes
NES Member
Fortunately for you, Tim caught *most* of it!
And poor Becka was almost blown away by the blast wave...
Oh, I caught some blast wave to, I actually called a few shots that missed to the 3 'O clock due to getting blasted. It evened out though when Jim started shooting his AR on my right Such a good time, can't wait for the next.
Feral
NES Member
First M1A
Finally, I get to add to this thread..
SA standard rifle, according to CS, it left the factory in March of 1976, serial no. 0054xx.
All USGI parts except for receiver and barrel.
I've had the rifle for several months, but did not find the time until Sunday afternoon to remove the clear polyurethane finish the previous owner had applied.
No sanding needed after, I just applied three coats of Formby's high gloss Tung Oil finish.
Finally, I get to add to this thread..
SA standard rifle, according to CS, it left the factory in March of 1976, serial no. 0054xx.
All USGI parts except for receiver and barrel.
I've had the rifle for several months, but did not find the time until Sunday afternoon to remove the clear polyurethane finish the previous owner had applied.
No sanding needed after, I just applied three coats of Formby's high gloss Tung Oil finish.
I'm so pissed at you right now. I've been trying to convince myself I don't need one...
...but after seeing yours it further enforces that I need one! Great looking rifle, my friend.
...but after seeing yours it further enforces that I need one! Great looking rifle, my friend.
Last edited:
