Show us your wheelguns!

[Mike1911]

Do you have a revolver, show it off here! Don't foget to tell everyone the make, model and caliber.
I'll start off.

S&W Model 66 4" barrel .357 mag.

S&W Chief Special .38

Colt Cowboy .45LC

 

[Viper22]

S&W Chiefs Special .38
Manufacture year: 1962

 

[Rockrivr1]

Here's my wheelgun collection. All Smiths.

S&W 500
S&W 686 Plus
S&W 66
S&W 642
S&W 15-2
S&W Combat Masterpiece

The 15-2 and CM were my uncles when he was a Sturbridge PO back in the 60s. The 15 is in awesome shape. The CM, well, is pretty beat up but function flawlessly.

 

[terraformer]

Colt Cowboy .45LC

Oh, I want that Colt. So few of them are available here that I waited six months then I decided to just buy a damn ruger instead (my only revolver to date). Nice firearm.

 

[Mike1911]

Oh, I want that Colt. So few of them are available here that I waited six months then I decided to just buy a damn ruger instead (my only revolver to date). Nice firearm.

I HAD a Colt SAA in .45LC, never fired it and never turned the cylinder. Like a damn fool I sold it for something else. I even had real ivory grips installed on it.

I got this just before the BAN went into law. It's unfired and the cylinder has not been turned. I take it out to oil it every now and then.

 

[Jose]

My first wheelgun, S&W Model 637-1

S&W Model 65-8

S&W Model 10-5

S&W Model 29-3, Lew Horton 1985 special edition

S&W Model 29-2

S&W Model 629-4 Mountain Gun

 

[Palladin]

Both Smith's....my 586-1, .357Mag Magnaported & my .38Spl 442

View attachment 2504

View attachment 2505

 

[Hanwei]

S&W 19-2

S&W 28-2

S&W 34-1

S&W 60

S&W 64-3

 

[caillean]

My Ruger Secuirty Six. I love it.

 

[Pilgrim]

I have too many to post and most are crappy pics anyway.
Here's a pic from each of the 3 major food groups.

from the S&W group, from 1955, a pre M36 Cheif's special:

from the Colt group, from 1905, 32cal New Police:

and from the Ruger Group,

 

[PaulD]

I don't own one but I'd like to buy one of these in 2009.

 

[Jose]

Hanwei, I dig your 19-2 and 64-3. All business.

 

[DTR]

Crappy picture qualtity but...

6" 586

4" 547

 

[Bugs100]

Bought this Model 37, 30 years ago.

 

[RichM]

My new friend:

S&W 642, .38 Special +P.

No internal lock!

Acquired at AAA Guns in W. Springfield 12/31 before the S&W rebate ended.

I put 50 rds through it on Sat.!

 

[depicts]

I go overboard for revolvers, especially Smith & Wesson. I can't get enough of them, and love the history if find, especially with the older guns.

Here are a few of the S&W's I got When I first started collecting them three years ago.

http://i217.photobucket.com/albums/cc23/depicts_2007/firstyearsmiths.jpg

 

[Raoul Duke]

I go overboard for revolvers, especially Smith & Wesson. I can't get enough of them, and love the history if find, especially with the older guns.

Here are a few of the S&W's I got When I first started collecting them three years ago.

http://i217.photobucket.com/albums/cc23/depicts_2007/firstyearsmiths.jpg

And a truly impressive collection it is I can safely say.

 

[Supermoto]

Obviously its S&W picture, I'm still working on fixing all the issues with mine
Did an action job, 4lbs DA
fixed the hammer from hitting the frame,
bobbed the hammer.
removed the burrs on the Yoke barrel end

Next I have to remove the burrs on the forcing cone and fix the nick in the side plate, change out the DA sear so that the hammer travels in a straight line and maybe even fix the terrible bluing job

Hooray for S&W Performance Center Quality control
Oh did I mention, when I sent the Revolver back to S&W, they wouldn't work on the gun because their Gunsmith could not get the locktited screw from my JPoint off. Yep, the S&W gunsmith did not know how to remove a loctited screw....

I'm not bitter though

 

[namedpipes]

These are the prettiest...

Colt Python .357

Etienne Mle 1873 Chamelot-Delvigne Service Revolver 11x17.8R

Colt Frontier Scouts .22 LR

And this is the ugliest...

Harrington & Richardson American Double Action .32

 

[EddieCoyle]

Colt Anaconda in .44 Magnum

It's funny, I have about 60 revolvers, with over 50 being S&Ws and I show a picture of a Colt.

 

[Hanwei]

Hanwei, I dig your 19-2 and 64-3. All business.

Thank you, sir Your mountain gun is definitely on my list... okay... they all are.

 

[Hanwei]

Jim, that Anaconda is GLORIOUS.

 

[Zappa]

Dan Wesson 715 w/8" VH Barrel

S&W Model 629-5 "Mountain Backpacker" 3" Barrel

Colt Python Bright Stainless 4" Barrel

 

[Timberwolf]

Obviously its S&W picture, I'm still working on fixing all the issues with mine
Did an action job, 4lbs DA
fixed the hammer from hitting the frame,
bobbed the hammer.
removed the burrs on the Yoke barrel end

Next I have to remove the burrs on the forcing cone and fix the nick in the side plate, change out the DA sear so that the hammer travels in a straight line and maybe even fix the terrible bluing job

Hooray for S&W Performance Center Quality control
Oh did I mention, when I sent the Revolver back to S&W, they wouldn't work on the gun because their Gunsmith could not get the locktited screw from my JPoint off. Yep, the S&W gunsmith did not know how to remove a loctited screw....
I'm not bitter though

Usually they tell you to remove anything that wasn't on the gun before you ship it.

 

[Negotiator]

Colt Anaconda in .44 Magnum

It's funny, I have about 60 revolvers, with over 50 being S&Ws and I show a picture of a Colt.

That cannon needs a set of wheels!!!

Nice Colt

 

[mark056]

Here are my two Colt Pythons taken with my cell phone. I'm no photographer !!!!

Mark L.

 

[Tim L]

I'd post my S&W 65-3 but I don't know how to post pictures on here.

 

[jpdopes]

I'll play. Here are my 4 inchers: clockwise from upper left. S&W 27-2, S&W .38 special Combat Masterpiece, S&W Nickel 586, S&W 66 no dash, S&W 19-3 nickel.

Here's a nickel 19 snubbie with S.P.D. stamped on the side.

S&W 66-2 3" w/Craig Spegel extended boot grips

 

[jpdopes]

I'd post my S&W 65-3 but I don't know how to post pictures on here.

Go to photobucket.com. It's free. Upload your pictures to their site. Once uploaded, copy the IMG link under the photo. Paste it into your reply.

 

[jpdopes]

here's one that I regretfully sold. I don't know what I was thinking! It's a 6" 28-2