One of mine.
i lol'd.
-
If you enjoy the forum please consider supporting it by signing up for a NES Membership The benefits pay for the membership many times over.
-
Be sure to enter the NES/Pioneer Valley Arms February Giveaway ***Smith & Wesson SD9VE 9MM***
NFA Items - Picture thread
- Thread starter Sinitron
- Start date
i lol'd.
Super secret squirrel NFA..
- - - Updated - - -
What could it be?
- - - Updated - - -
This may scare you Mass folks so you may want to avert your gaze. It is black it holds 30 rounds. It has a silencer.
- - - Updated - - -
People say that but I have got more people who say they hate firearms to shoot this and enjoy it then I can count.
- - - Updated - - -
What could it be?
- - - Updated - - -
This may scare you Mass folks so you may want to avert your gaze. It is black it holds 30 rounds. It has a silencer.
- - - Updated - - -
People say that but I have got more people who say they hate firearms to shoot this and enjoy it then I can count.
My daughters Mosquito. Pew on people..
- Joined
- Aug 7, 2012
- Messages
- 552
- Likes
- 75
Stamp arrived today! Off to the range this week:
More YHM on this gun then YHM puts on their complete rifles! Decked out in NES badging.
Ace Buffer, Buffer Tube, Spring (ACE)
Ace Skeleton Ultra Light Entry Stock .5" recoil pad (ACE)
Geisselle 2 Stage Trigger with LPK (Brownells)
Hogue Pistol Grip (Brownells)
Magpul BAD (Brownells)
Magpul Enhanced] Trigger Guard (Brownells)
YHM - 15 NES GB 2012 Lower Receiver (no Transfer)
YHM - 9540 Keymod Mil-Spec Vertical Grip w/Storage (EBAY)
YHM - 100 - CAL .300 Blackout Upper (JSE)
YHM - 5220 - 7.29" SLK Keymod Series (Carbine) (Primary Arms)
YHM - 9383 Low Pro Gas Block .750 set screw, black (EBAY)
YHM - 7284 EZ Pull Takedown Pin Set (JSE)
YHM - BCBT - 556 Bolt Carrier Group (Primary Arms)
YHM - 3085 - MB - A Muzzle Brake (R&R Arms)
YHM - 9200 Keymod Q.D. Sling Adapter (JSE)
YHM - 9205 Picatinny Adapter (C.K.R.S.) x 2 (JSE)
YHM - 9553 - Eotech Thumb Screw (Ebay)
NES Dust Cover and BCM Forward Assist (NES & BCM)
BCM Gunfighter Charging Handle - Mod 4 - Medium (BCM)
Pistol Gas Tube (MAS Defence) / MI QD Swing Swivel (JSE)
8.5" 300 AAC Blackout 1x8 416R Stainless Steel Barrel (MAS Defense)
Eotech XPS2-300 Blackout (Midway) w/ Scope Coat (Amazon)
Looking forward to the DHM Car Shoot in June @ MRGC!
Sent from my iPhone using Tapatalk
More YHM on this gun then YHM puts on their complete rifles! Decked out in NES badging.
Ace Buffer, Buffer Tube, Spring (ACE)
Ace Skeleton Ultra Light Entry Stock .5" recoil pad (ACE)
Geisselle 2 Stage Trigger with LPK (Brownells)
Hogue Pistol Grip (Brownells)
Magpul BAD (Brownells)
Magpul Enhanced] Trigger Guard (Brownells)
YHM - 15 NES GB 2012 Lower Receiver (no Transfer)
YHM - 9540 Keymod Mil-Spec Vertical Grip w/Storage (EBAY)
YHM - 100 - CAL .300 Blackout Upper (JSE)
YHM - 5220 - 7.29" SLK Keymod Series (Carbine) (Primary Arms)
YHM - 9383 Low Pro Gas Block .750 set screw, black (EBAY)
YHM - 7284 EZ Pull Takedown Pin Set (JSE)
YHM - BCBT - 556 Bolt Carrier Group (Primary Arms)
YHM - 3085 - MB - A Muzzle Brake (R&R Arms)
YHM - 9200 Keymod Q.D. Sling Adapter (JSE)
YHM - 9205 Picatinny Adapter (C.K.R.S.) x 2 (JSE)
YHM - 9553 - Eotech Thumb Screw (Ebay)
NES Dust Cover and BCM Forward Assist (NES & BCM)
BCM Gunfighter Charging Handle - Mod 4 - Medium (BCM)
Pistol Gas Tube (MAS Defence) / MI QD Swing Swivel (JSE)
8.5" 300 AAC Blackout 1x8 416R Stainless Steel Barrel (MAS Defense)
Eotech XPS2-300 Blackout (Midway) w/ Scope Coat (Amazon)
Looking forward to the DHM Car Shoot in June @ MRGC!
Sent from my iPhone using Tapatalk
Shark_Cage
NES Member
Well it's engraved and just needs to go to the range. Total length 23.5", 7.5 SS barrel. 300BLK
Threw the optic and laser for fun lol
Threw the optic and laser for fun lol
This thread is picking up again with legit stuffs. I approve.
Put money on this. It's a complete upper in 6.8 with a pined can making it a one stamp upper.
ranger4-7
Army Veteran
Approved today. PWS MK110 10.75" with MRO on Scalarworks absolute mount, MBUS Pro, BCM Furniture.
Need to go to the range with this puppy.
(and I know the Triad isn't mounted correctly - I still have to use the shims to get it clocked right)
That is so slick! I love the gray furniture too.
ChevyGuy91
NES Member
- Joined
- Mar 25, 2008
- Messages
- 23,720
- Likes
- 25,736
Approved today. PWS MK110 10.75" with MRO on Scalarworks absolute mount, MBUS Pro, BCM Furniture.
Need to go to the range with this puppy.
(and I know the Triad isn't mounted correctly - I still have to use the shims to get it clocked right)
ugh, that's hot. I have a whole box of urban-dark-wolf-flat-gray bits to finish my 10.5"er. I should stop being lazy.
very nice. love the grey.
Stryker
NES Member
Not the best pictures but maybe will get some daytime pictures up later
Finished my first build which also happens to be my first SBR - about 1/2 the parts from group buys (including a spikes BCG I forgot I had from a buy long ago and a QD lower from that train-wreck of a group buy a few years ago)
Side charger pretty cool and functions well - had to grind a small part of the hand guard where it met the upper on the side where the charge handle is located to get the handguard on - easy fix and flawless fit.
Love the look of the Ferfrans CRD - IMO, after shooting the rifle with just the brake and then with the outer piece (CRD) attached - the CRD makes a ton of difference in minimizing the blowback both in the face of the shooter and others on the line - shoots quite a fireball though
Probably the best built and functioning AR I have - it has a really nice tightness to it (if that makes sense) i.e everything fits well
But I had a lot of fun picking decent components so it is also the most $$ AR I own
Will have to chill a bit for the next build.
Quentin Defense Billet Lower
Matrix Arms Side Charger (from current group buy)
Noveske CQB 5.56MM - 10.5 barrel - included gas block and tube
Seekins MCSR V2 handguard
Ferfans QBD muzzle device
Giesselle GS2
Spikes BCG
Spike T2 Buffer
Magpul K2+ grip
Magpul fixed carbine stock
Battle Arms Development Safety Selector
Strike Fire 2
Areo Ultralight 30mm mount (the mount that came with the SF2 had a knob that was in the way of the side-charger)
Finished my first build which also happens to be my first SBR - about 1/2 the parts from group buys (including a spikes BCG I forgot I had from a buy long ago and a QD lower from that train-wreck of a group buy a few years ago)
Side charger pretty cool and functions well - had to grind a small part of the hand guard where it met the upper on the side where the charge handle is located to get the handguard on - easy fix and flawless fit.
Love the look of the Ferfrans CRD - IMO, after shooting the rifle with just the brake and then with the outer piece (CRD) attached - the CRD makes a ton of difference in minimizing the blowback both in the face of the shooter and others on the line - shoots quite a fireball though
Probably the best built and functioning AR I have - it has a really nice tightness to it (if that makes sense) i.e everything fits well
But I had a lot of fun picking decent components so it is also the most $$ AR I own
Will have to chill a bit for the next build.
Quentin Defense Billet Lower
Matrix Arms Side Charger (from current group buy)
Noveske CQB 5.56MM - 10.5 barrel - included gas block and tube
Seekins MCSR V2 handguard
Ferfans QBD muzzle device
Giesselle GS2
Spikes BCG
Spike T2 Buffer
Magpul K2+ grip
Magpul fixed carbine stock
Battle Arms Development Safety Selector
Strike Fire 2
Areo Ultralight 30mm mount (the mount that came with the SF2 had a knob that was in the way of the side-charger)
Welcome to the obsession; nice looking weapon you have there.
You are welcome to come up to NH and shoot that on my property any time you want. All I ask if a few mag dumps worth.
![[smile]](/xen/styles/default/xenforo/smilies.vb/001.gif "Smile [smile]")
No front pin?
ChevyGuy91
NES Member
- Joined
- Mar 25, 2008
- Messages
- 23,720
- Likes
- 25,736
So is it really the real thing?
fiero ferrari demands paddle release.
ChevyGuy91
NES Member
- Joined
- Mar 25, 2008
- Messages
- 23,720
- Likes
- 25,736
fiero ferrari demands paddle release.
That's more like it.
Has Anyone Really Been Far Even as Decided to Use Even Go Want to do Look More Like?
edit:
Last edited:
ChevyGuy91
NES Member
- Joined
- Mar 25, 2008
- Messages
- 23,720
- Likes
- 25,736
![[rofl]](/xen/styles/default/xenforo/smilies.vb/013.gif "ROFL [rofl]")
i don't know about you bro, but i'm here for the NFA...
9mm fun
Sent from my iPhone using Tapatalk
ChevyGuy91
NES Member
- Joined
- Mar 25, 2008
- Messages
- 23,720
- Likes
- 25,736
WHY ARE YOU TYPING IN ALL CAPS? LMFAO
Boris
Son of Kalashnikov
DO YOU HAVE A SEAR IN IT? OR IS STILL STILL JUST SEMI? BECAUSE THAT WOULD BE LIKE A FERRARI BUT IN AUTOMATIC AND NOT MANUAL.
Boris
Son of Kalashnikov
I THOUGHT THAT FERARRIES USED tiptronics ANYWAY
ChevyGuy91
NES Member
- Joined
- Mar 25, 2008
- Messages
- 23,720
- Likes
- 25,736
Or a Ferrari with a Ford motor in it.
- - - Updated - - -
Paddles for days.
Boris
Son of Kalashnikov
ChevyGuy91
NES Member
- Joined
- Mar 25, 2008
- Messages
- 23,720
- Likes
- 25,736
So back on topic, if it is not a real deal MP5K, what did it start it's life out as?
