Yes.Are some of those frangible? (first pic?)
Post 118: 90gr Inceptor SRR (1st pic), SF7.62 123 NTP (2nd pic), polygunbag 105gr (4th pic).
Post 119: Sinterfire 42gr (1st pic)
If you enjoy the forum please consider supporting it by signing up for a NES Membership The benefits pay for the membership many times over.
Be sure to enter the NES/MFS May Giveaway ***Canik METE SFX***
Yes.Are some of those frangible? (first pic?)
Are you referencing the PCC/BR benchrest tool for a + .002" deeper primer pocket?^^^^Edit: Scroll down...^^^^^
i use a similar rcbs productI use a Sinclair International solid carbide primer pocket uniformer....
No, I only have the large rifle and the small rifle carbide uniformers. Looking now, I'm seeing the PCC/BR tool for the first time. I hadn't noticed it before at the bottom of the listing...Are you referencing the PCC/BR benchrest tool for a + .002" deeper primer pocket?
749-003-713WB
PPC/BR Primer Pocket Uniformer
Mfr Part: UN8006
I have the adjustable uniformers from RCBS, but stoped using them when I had one come out of adjustment and cut the pockets too deeply on some 7.62x51 LC brass. Replaced them with the Sinclair solid uniformers. I have used the Sinclairs for tens of thousands and they are still sharp as new.i use a similar rcbs product
Ah. I interpreted your "Scroll down" post as "check out the last item on the page"...No, I only have the large rifle and the small rifle carbide uniformers. Looking now, I'm seeing the PCC/BR tool for the first time. I hadn't noticed it before at the bottom of the listing...
Berdan I imagine...Igman ammo arrived. This is some nice looking ammo and packaged very well. I like the 15 round boxes.
The pinkish red primer sealant reminds me off the PPU 5.56 I have. View attachment 563283
Others have said it’s boxer primed but I won’t know until I shoot some. Hopefully this weekendBerdan I imagine...
is it depriming OK or brakes down the pushing rod?
Not a bad deal. I paid 40 cpr shipped for brass boxer primed Igman x39 last month. 43 cpr shipped for nice PPU brass is pretty good I'd say.The company with pulled bullets also has PPU M67 (boxer) for 43¢ per round (840 count) TYD.
MFG: Prvi Partizan Caliber: 7.62x39mm Bullet Weight: 123gr Bullet Style: FMJ (Full Metal Jacket) Casing: New Brass Case, Boxer Primed, Non Corrosive, Non Magnetic
In Stock
$359.99
WOW! And tax free with free shipping!The company with pulled bullets also has PPU M67 (boxer) for 43¢ per round (840 count) TYD.
MFG: Prvi Partizan Caliber: 7.62x39mm Bullet Weight: 123gr Bullet Style: FMJ (Full Metal Jacket) Casing: New Brass Case, Boxer Primed, Non Corrosive, Non Magnetic
In Stock
$359.99
Nice. I snagged a case. Cheapest steel x39 from TSUSA is $371 per 1k shipped. What the hell is an extra 6 cpr for quality brass cased ammo. Though I have no plans to reload x39.WOW! And tax free with free shipping!
That’s cheaper than I bought it for pre-wuflu. Just ordered 2 cases, thank you for the heads up!
Jesus Christ, lol...just what I need. I do keep a close eye on my CC though and get a blip on my phone any time a transaction is processed. I typically know within seconds if my card has been used.Nice. I snagged a case. Cheapest steel x39 from TSUSA is $371 per 1k shipped. What the hell is an extra 6 cpr for quality brass cased ammo. Though I have no plans to reload x39.
Also keep an eye on your credit card transactions. LOTS of reported compromised CC's after buying from them. They're a legit company but their security is shit from what I've read.
Lol I used a CC that I rarely ever use so I don't care if I need a new one issued. It's a PITA when I have to cancel a CC that gets used a lot.Jesus Christ, lol...just what I need. I do keep a close eye on my CC though and get a blip on my phone any time a transaction is processed. I typically know within seconds if my card has been used.
I agree with buying brass cased ‘just because’, but I DO plan to reload for it because I have two suppressors that will thread onto various 7.62x39 rifles and pistols of mine and will be making all the subsonic cast bullets I can and coating with hitek.
That’s where casting comes in!paying 30+ cents just for the jacketed bullets, makes it an expensive blasting/plinking caliber.
I'm more than willing to hold onto a few for you if you want lessThat’s where casting comes in!
And same here WRT a CZ 527...I ‘need’ a suppressor ready model if I can ever find one. It’s on my very short list, but I’ve basically stopped buying guns for the time being...I think I might actually have too many
My project is going to be making subsonic cast loads to go with my suppressors. I know that’s right up your alley!I was a bit surprised to see it myself. I don't usually check that site for ammo, but, what do you know! Good luck and enjoy.
I can't vouch for their "in house" brand of ammo, but I've been ordering bullets and powder from them all along.
The Inceptor 90gr SRR bullets were available from Em-way awhile back for about 10¢ a pop. They work fine for me.