These are a huge improvement. I run them on my razors. I need to buy some for the Peltors as well.
-
If you enjoy the forum please consider supporting it by signing up for a NES Membership The benefits pay for the membership many times over.
Deals and steals
- Thread starter Al-Jim19
- Start date
slugworth
NES Member
Complete Mil-Spec Lower Parts Kit
Always Armed Complete Mil-Spec Lower Parts Kit
www.righttobear.com
Tallahassee
NES Member
AO Precision Premium Phosphate Bolt Carrier Group - 158 HPT/MPI
This mil-spec bolt carrier group goes through rigorous quality control tests before it's made available for purchase, including high pressure testing and magnetic particle inspection. Its phosphate coating protects against corrosion and build-up, and the interior is sleek chrome. Shop today for...
www.righttobear.com
$70 shipped for one, great bcg. Grab two if you can.
Last edited:
What is the difference between that carpenter steel and this one?AO Precision Premium Phosphate Bolt Carrier Group - 158 HPT/MPI
This mil-spec bolt carrier group goes through rigorous quality control tests before it's made available for purchase, including high pressure testing and magnetic particle inspection. Its phosphate coating protects against corrosion and build-up, and the interior is sleek chrome. Shop today for...
$70 shipped for one, great bcg. Grab two if you can.
AO Precision Premium Nitride Bolt Carrier Group - HPT/MPI
These premium 9310 Bolt carrier groups are manufactured by AO Precision to the highest standards of top tier manufacturers within the industry. AO makes these HPT / MPI BCG's for other Military contractor juggernauts, such as FN America. All bolts are rigorously inspected and are individually...
www.righttobear.com
Sunny
NES Member
$70 BCG is too expensive now. A page or two ago, there was a BCG, upper receiver, and charging handle for $90.AO Precision Premium Phosphate Bolt Carrier Group - 158 HPT/MPI
This mil-spec bolt carrier group goes through rigorous quality control tests before it's made available for purchase, including high pressure testing and magnetic particle inspection. Its phosphate coating protects against corrosion and build-up, and the interior is sleek chrome. Shop today for...
$70 shipped for one, great bcg. Grab two if you can.
Reviews from 4-8 months ago on another site say to avoid the nitrided one due to poor / rough finish and to go with the carpenter steel.What is the difference between that carpenter steel and this one?
AO Precision Premium Nitride Bolt Carrier Group - HPT/MPI
These premium 9310 Bolt carrier groups are manufactured by AO Precision to the highest standards of top tier manufacturers within the industry. AO makes these HPT / MPI BCG's for other Military contractor juggernauts, such as FN America. All bolts are rigorously inspected and are individually...
cathouse01
NES Member
- Joined
- May 10, 2018
- Messages
- 2,494
- Likes
- 4,842
Since the creation of Carpenter 158, the metals industry has continued to innovate, creating new blends of steels. 9310 is a AISI standard grade of tool steel that makes it about ~7% stronger than "mil-spec" Carpenter 158 steels, when appropriately treated. Its commonly used in the aerospace industry where toughness, impact strength, and solid wear characteristics are required.What is the difference between that carpenter steel and this one?
AO Precision Premium Nitride Bolt Carrier Group - HPT/MPI
These premium 9310 Bolt carrier groups are manufactured by AO Precision to the highest standards of top tier manufacturers within the industry. AO makes these HPT / MPI BCG's for other Military contractor juggernauts, such as FN America. All bolts are rigorously inspected and are individually...
ETA And just as an aside, Carpenter 158 has nothing to do with woodworking, it’s named after Carpenter Technologies’ 158 steel blend.
Last edited:
mikelawtown
NES Member
Toolcraft Black Nitride 158 Bolt Carrier Group - MPI Bolt
The bolt is made from 158 steel while the carrier is made from 8620 tool steel. It is shot-peened and magnetic particle inspected before being made available for sale and has a variety of other top-of-the-line features.
www.righttobear.com
Tallahassee
NES Member
They have good deals on bcg right now for sure.Toolcraft Black Nitride 158 Bolt Carrier Group - MPI Bolt
The bolt is made from 158 steel while the carrier is made from 8620 tool steel. It is shot-peened and magnetic particle inspected before being made available for sale and has a variety of other top-of-the-line features.
Tallahassee
NES Member
I never noticed a difference between the c158 and the 9310. The c158 is mil spec.What is the difference between that carpenter steel and this one?
AO Precision Premium Nitride Bolt Carrier Group - HPT/MPI
These premium 9310 Bolt carrier groups are manufactured by AO Precision to the highest standards of top tier manufacturers within the industry. AO makes these HPT / MPI BCG's for other Military contractor juggernauts, such as FN America. All bolts are rigorously inspected and are individually...
Personally, I like phosphate coating with the chrome liner. Nitride is definitely easier to clean and smoother.
AO is on the same level as toolcraft.
slugworth
NES Member
AimSurplus, LLC
aimsurplus.com
one more praise for those gel pads - received them over the weekend, tried it on - very nice cheap upgrade.
pinefd
NES Member
Ecosystem3
NES Member
Vortex Venom Reddot On Sale at PSA ($80 off)
https://palmettostatearmory.com/vortex-venom-red-dot-top-load-3-moa-dot.html
Make sure you use the code VENOM for the savings.
steve8140
NES Member
Those smith and Wesson knives sold out but now they have the serrated blade on sale for $33.99
Smith & Wesson knife
LEGACY20 is a active code but I can’t get it to work on this knife. The wife saw the first knife and is pissed I didn’t get her one.
Smith & Wesson knife
LEGACY20 is a active code but I can’t get it to work on this knife. The wife saw the first knife and is pissed I didn’t get her one.
slap shot
NES Member
Got mine today. The thing is a brickThose smith and Wesson knives sold out but now they have the serrated blade on sale for $33.99
Smith & Wesson knife
LEGACY20 is a active code but I can’t get it to work on this knife. The wife saw the first knife and is pissed I didn’t get her one.
View attachment 574024
Kind of clunky operation but it’s solid and very sharp. The spear point is wicked.
steve8140
NES Member
Same, it seems pretty solid and the blade is very sharp as expected. I’m happy with it for the cost and will be playing with it for the next week. It’s my new fidget spinner.Got mine today. The thing is a brick
Kind of clunky operation but it’s solid and very sharp. The spear point is wicked.
slugworth
NES Member
My buddy got 12 of themThose smith and Wesson knives sold out but now they have the serrated blade on sale for $33.99
Smith & Wesson knife
LEGACY20 is a active code but I can’t get it to work on this knife. The wife saw the first knife and is pissed I didn’t get her one.
View attachment 574024
steve8140
NES Member
He must be getting ready for next Christmas and getting all the stocking stuffers.My buddy got 12 of them
What sucked about it?
Sunny
NES Member
Meh it was cheap thin plastic, finicky, wasnt even ergonomically designed. It basically had no usability other than a flimsy toy for an 8 year old.
slugworth
NES Member
16″ Nato 5.56 Barrel | M4 Contour | 1:8 Twist | Carbine Gas System (no packaging)
Anderson Manufacturing 16″ Nato 5.56 Barrel | M4 Contour | 1:8 Twist | Carbine Gas System More Information…
www.durkintactical.com
Sunny
NES Member
Nicely packed in clear plastic. With hook holes so you can grab them off the shelf! I have no doubt that an anderson barrel is gtg.16″ Nato 5.56 Barrel | M4 Contour | 1:8 Twist | Carbine Gas System (no packaging)
Anderson Manufacturing 16″ Nato 5.56 Barrel | M4 Contour | 1:8 Twist | Carbine Gas System More Information…
Also, Durkin is a good store. I had to return an item and Jess Durkin took care of me no problem.
slugworth
NES Member
Tallahassee
NES Member
I have something with an anderson 14.5 barrel, shoots very well. Never would think it was $75.
mikelawtown
NES Member
Wow16″ Nato 5.56 Barrel | M4 Contour | 1:8 Twist | Carbine Gas System (no packaging)
Anderson Manufacturing 16″ Nato 5.56 Barrel | M4 Contour | 1:8 Twist | Carbine Gas System More Information…
I bought a Rosco Bloodline barrel recently for another build but for that $ I would have jumped on this
Mesatchornug
NES Member
- Joined
- Dec 11, 2011
- Messages
- 13,224
- Likes
- 27,559
considering what I paid for the RockChucker kit last year (also on sale) this looks like a pretty great price on the Rebel kit for someone looking to get into reloading:
www.midwayusa.com
RCBS Rebel Master Single Stage Press Kit
The Rebel Master Reloading Kit is the ideal kit for anyone looking to start reloading and will find a perfect home for someone just starting out...
www.midwayusa.com
This one is in worse condition (good vs. VG), but 250 less and they will ship to a C&R holder.
Chinese SKS Type 56 Semi Auto Rifle, 7.62x39, Factory 26 Surplus, Good Cond, Spike Bayo, C+R.
Chinese SKS Type 56 Semi Auto Rifle, 7.62x39, Factory 26 Surplus, Good Cond, Spike Bayo, C+R.
Stripped upper $32
www.righttobear.com
MFT minimalist, $45
www.righttobear.com
B5 complete, $55
www.righttobear.com
SBA brace, $90 (half off)
www.righttobear.com
M4 Flat Top Upper Receiver - Stripped BLEM
M4 Flat Top Anodized Stripped Upper Receiver - BLEM. Limited Blemished Batch! 100% Functional AR15 Uppers!
www.righttobear.com
Mission First Minimalist Stock + TS 6 Position Buffer Tube Kit
Veteran-owned and operated, we utilize a live inventory system to give you the latest and best in replacement AR-15 parts and accessory upgrades as well as Glocks. Choose from the most reputable brands to build an AR-15 or Glock pistol that's entirely your own. Free shipping available on select...
www.righttobear.com
B5 Systems Bravo Stock + TS 6 Position Buffer Tube Kit - Black
B5 Systems Bravo Stock + TS 6 Position Buffer Tube Kit - Black
www.righttobear.com
SB Tactical SBM4 Pistol Stabilizing Brace + Pistol Buffer Tube Kit
This SB Tactical SBM4 Pistol Stabilizing Brace comes with a complete Mil-Spec Pistol Buffer Tube Kit, which is the perfect diameter for a snug and reliable fit. This AR pistol kit is exactly what you need to complete your pistol build!
www.righttobear.com
Speaking of a cheap stock for MA compliant AR - this one has inserts to adjust LOP:
www.righttobear.com
Strike Industries Modular Fixed Stock - Choose Color
The Strike Industries Modular Fixed Stock comes in Black or FDE
www.righttobear.com
Similar threads
