If you enjoy the forum please consider supporting it by signing up for a NES Membership The benefits pay for the membership many times over.
Be sure to enter the NES/MFS May Giveaway ***Canik METE SFX***
LMAO. I see the typical NES reading comprehension of a gnat has manifested itself in you.
So to break down the post you quoted--posted below so you don't have to scroll.
1. There are many ways to overcome the no shipping to Mass thing.
2. The best option is to move out of the state and refuse to give aid and comfort to an oppressive enemy. Those who continue to pay a state to kneel on their necks are part of the self licking ice cream cone that is the Mass nanny state.
3. If you refuse to vote with your feet, there are many cheaper options available for non federally regulated items. I won't go into them here because those methods are obviously too complicated for you.
I have seen Sig uppers brand new at a certain well known store on cape cod.
These guys are kinda "off the grid". I bought a 22LR silencer from them, very friendly. They operate out of what looks like a residential house, there will be a small sign on the road, walk down the driveway around the back of their house and into the "tent". a LOT of tacti-cool stuff for the AR guys. Worth the trip.Seems like a very nice place. I need to get up there!
Also heard that Spags always had them in stock, but really wasn't inerested in driving that far.
Blueberry muffinsI was thinking of driving out to Framingham. Any good deals at Jordan Marsh?
They also have a Radio Shack phone store.In the old W T Grants building
That's a tender subject.Next to the squirt guns in Child World.
No longer confused with Jordan's Furniture.I was thinking of driving out to Framingham. Any good deals at Jordan Marsh?
Good.BCM will ship to MA, but you must go through the website for MA residents.
www.rimjob.org
I bought one from them too near that time. Nothing earth shattering, an Anderson with BCG and CH for $400. I mated it with an Anderson lower. I missed the complete upper at Four Seasons and was pretty crestfallen, went to MFS to rattle off a few, went into their shop afterwards and then...viola! I exclaimed ‘thar she blows’ and bought it. It was actually extremely clutch.Bradlees?
MFS had an upper for sale 6 months ago on the wall. Generic brand. But my buddy bought it.
I’ll just buy parts and build.
I got a white oak barrel a bit back. The gas block area was a bit oversized. Had to sand down the gas block to fit. What a pain. But ultimately it’s all set.
Knew my buddy was looking for an upper. Texted and called him to see if he wanted it (no reply). Almost just bought it for him as it was around closing time.I bought one from them too near that time. Nothing earth shattering, an Anderson with BCG and CH for $400. I mated it with an Anderson lower. I missed the complete upper at Four Seasons and was pretty crestfallen, went to MFS to rattle off a few, went into their shop afterwards and then...viola! I exclaimed ‘thar she blows’ and bought it. It was actually extremely clutch.
They had another one besides Anderson there it was slightly higher end but I was just going for an entry level build so I didn’t go for it but they had multiple there. I don’t want to say for sure what manufacturer it was because I don’t recall exactly but the one at FS was Rock River and there was also a Trijicon Acog I wanted that got scooped up. I guess the moral of the story is always call to reserve these items and before ordering online patrol your local gunstore ‘used’ inventory lists.Knew my buddy was looking for an upper. Texted and called him to see if he wanted it (no reply). Almost just bought it for him as it was around closing time.
he called the next day and he drove an hour to grab it. So far so good.
almost bought it myself, just because.
He tried to reserve it over the phone with a CC. They said no. Come and take it. So he bolted up there to grab it and got it.They had another one besides Anderson there it was slightly higher end but I was just going for an entry level build so I didn’t go for it but they had multiple there. I don’t want to say for sure what manufacturer it was because I don’t recall exactly but the one at FS was Rock River and there was also a Trijicon Acog I wanted that got scooped up. I guess the moral of the story is always call to reserve these items and before ordering online patrol your local gunstore ‘used’ inventory lists.
Wow that’s interesting. I would have thought they would have reserved it. Then again, this would have been in the heat of the Covid rise. When I went it was around April and there were mask mandates but it wasn’t as crazy with things being bought out across the board. Nevertheless, I knew it was time to build and wanted to get components before things got really hairy.He tried to reserve it over the phone with a CC. They said no. Come and take it. So he bolted up there to grab it and got it.
I was surprised as well.Wow that’s interesting. I would have thought they would have reserved it. Then again, this would have been in the heat of the Covid rise. When I went it was around April and there were mask mandates but it wasn’t as crazy with things being bought out across the board. Nevertheless, I knew it was time to build and wanted to get components before things got really hairy.
I just called them and they said they are currently out of uppers. Also, they are shifting use of their uppers and dedicating them solely to custom builds within the shop. Which isn't necessarily a bad thing; I'm sure if one was able to bring in a lower and ask them to do a custom build with one of their in stock uppers they wouldn't have any problem with that, assuming if that person was in MA they would make the rifle MA compliant once in state, should that person care about stuff like that. It just means one wouldn't be able to purchase the upper from them and leave with it in hand...which is not possible at this point anyway.Another easy way would be a friend in NH to ship it to, or to buy it for you if the company gets bent over a MA billing address.
Or call around NH stores - unlike MA some NH stores (like Wicked Weaponry) basically do all their business in AR and AK guns/accessories. They normally stock uppers, barrels, all the parts, which are not controlled.
I just called them and they said they are currently out of uppers. Also, they are shifting use of their uppers and dedicating them solely to custom builds within the shop. Which isn't necessarily a bad thing; I'm sure if one was able to bring in a lower and ask them to do a custom build with one of their in stock uppers they wouldn't have any problem with that, assuming if that person was in MA they would make the rifle MA compliant once in state, should that person care about stuff like that. It just means one wouldn't be able to purchase the upper from them and leave with it in hand...which is not possible at this point anyway.
They also don't have any Glock slides, so if someone sees a Glock 20 slide anywhere, please let me know!
The way people throw that around here borders on comical.Yes !
Uproot your life to buy an upper receiver !!
That is sound logic.