hv55maxx
NES Member
Damn. You must be out by North Adams or somethingYeah you're far from most shops in this state
south of there but yeah, out there.
If you enjoy the forum please consider supporting it by signing up for a NES Membership The benefits pay for the membership many times over.
Be sure to enter the NES/Pioneer Valley Arms February Giveaway ***Smith & Wesson SD9VE 9MM***
Damn. You must be out by North Adams or somethingYeah you're far from most shops in this state
I have yet to hold a 380 pistol I like?
How can you tell? Or you just being sarcasticNo Varget tho![]()
sarcasm, lolHow can you tell? Or you just being sarcastic![]()
Yeah it looks like they’ve creeped up to 10-11 cents each from one vendor I deal with. He used to be like 8-9 cents.I've been reloading .223 for past few weeks while working from home and I'm starting to get low on projectiles. I guess I'll need to switch over to .38 and .308 for a while until 55gr FMJ projectiles are available online for a good price again.
annealing
I want a bunker like thisWell that’s a beautiful site
View attachment 346283
What do you use for annealing?
Yeah the components are drying up online it seems especially primers. Shooters Outpost looks like they got a ton of components but you're in Taunton so a good haul.Ordered 12 Lbs of powder and 1k 115gn Zero JHP. Had 8# of H335 and 8# of CFE pistol in the cart but was an idiot and waited an hour to order and it was gone so had to change
8# of CFE 223
4# of Silhouette
Now just need to find enough primers to make all of that powder useful (down to less than 9k total)
ah the components are drying up online
Never used it - Just bought this because it has a lot of load data, is well recommended, and I got burned in the last shortage by waiting to buy only a known powderYeah the components are drying up online it seems especially primers. Shooters Outpost looks like they got a ton of components but you're in Taunton so a good haul.
I've never used Silhouette before. You running that in 9mm?
Nice.I loaded the last of my 158g bullets in 357 magnum. I still have some 125g, but I'll save them for when I shoot some of my Starline brass.
I'm sitting on a case of 40 bullets, but I have five 50 cal ammo cans full of loaded 40. I don't plan on shooting Limited division (40) this season... If we ever get to actually shooting matches.
Good looking out there. I have a couple pounds of Power Pistol that I only use for 7.62x25 (haven't shot that caliber in years) but will use it for other calibers like 9mm and 357 if I can't get my go-to powders down the road..and I got burned in the last shortage by waiting to buy only a known powder
Good looking out there. I have a couple pounds of Power Pistol that I only use for 7.62x25 (haven't shot that caliber in years) but will use it for other calibers like 9mm and 357 if I can't get my go-to powders down the road..
Yeah it’s not a true magnum powder but it’s better than nothing if I run out.9mm, sure. 357? Did you chrono it? I imagine it runs/bangs/flashes about like weak 2400. Is that about right?
I've only tried Unique, H110, and 2400 in 357. I have some Green Dot I was thinking of trying, but I have to weigh charges by hand because it meters like oatmeal.Yeah it’s not a true magnum powder but it’s better than nothing if I run out.
Yeah it’s not a true magnum powder but it’s better than nothing if I run out.
i was just looking into silhouette powder, seems right up my alley for cast loads. It seem to be in stock everywhere too.Ordered 12 Lbs of powder and 1k 115gn Zero JHP. Had 8# of H335 and 8# of CFE pistol in the cart but was an idiot and waited an hour to order and it was gone so had to change
8# of CFE 223
4# of Silhouette
Now just need to find enough primers to make all of that powder useful (down to less than 9k total)