AR-15 thread... I'll show you mine if you show me yours.

[Spinning Piledriver]

My Windham. Got the Aimpoint Pro today, and couldn't resist snapping some modeling shots.

 

[Dmn0166]

 

[chinalfr]

Just finished this build. Temporary sight added for now.

Build spec included :
Seekins Precision billet upper & lower
Seekins Precision SP3R 15" quad rail
BCM 16" mid length BFH barrel
Seekins SP ATC pinned to barrel
Young Manufacturing Chrome BCG
Mega trigger
Magpul MOE rifle stock
Magpul MBUS sight
Aimpoint reddot sight with 3x magnifier

Sent it from iPhone 5 LTE

 

[Jrjr]

Just finished this build. Temporary sight added for now.

Build spec included :
Seekins Precision billet upper & lower
Seekins Precision SP3R 15" quad rail
BCM 16" mid length BFH barrel
Seekins SP ATC pinned to barrel
Young Manufacturing Chrome BCG
Mega trigger
Magpul MOE rifle stock
Magpul MBUS sight
Aimpoint reddot sight with 3x magnifier

Sent it from iPhone 5 LTE

That is really really nice. Wow. I am beginning to have sellers remorse on my lower...

Range report needed when applicable.

 

[slugworth]

night setup


day setup

Don't forget to register those mags!!!

 

[AllaSnackbah]

Don't forget to register those mags!!!

sold the gun and all the mags

 

[CoastieRon]

I'll show mine when I get my QD upper in (wtf?lol)

sent from the T3

 

[dreppucci007]

FINALLY finished up my first build in like 3 years...

Spikes Tactical Lower
Spikes Enchanced LPK (Battle Trigger, KNS Non-Rotating pins, Ergo grip, etc.)
BCM BFH Upper w/BCM Gunfighter Charging Handle and 16" mid-length barrel (1:7 twist)
Larue Tactical 12" Handguard
Larue Tactical buffer & buffer tube
Magpul CTR stock with Larue Tactical RISR System
Aimpoint PRO with Magpul MBUS
Barska Green Laser

 

[Sir_Gawain]

FINALLY finished up my first build in like 3 years...

Spikes Tactical Lower
Spikes Enchanced LPK (Battle Trigger, KNS Non-Rotating pins, Ergo grip, etc.)
BCM BFH Upper w/BCM Gunfighter Charging Handle and 16" mid-length barrel (1:7 twist)
Larue Tactical 12" Handguard
Larue Tactical buffer & buffer tube
Magpul CTR stock with Larue Tactical RISR System
Aimpoint PRO with Magpul MBUS
Barska Green Laser

Nice Build

 

[atilla]

i can dig it.

 

[travis]

Cut down a 9mm barrel to make this. New free float incoming for it..


[video=youtube_share;tzultzsVTs8]http://youtu.be/tzultzsVTs8[/video]

 

[Sir_Gawain]

Cut down a 9mm barrel to make this. New free float incoming for it..

+1 to you!

 

[Deleted member 12999]

View attachment 70636

Went full FDEtard on my M&P 15T, and I LOVE IT.
15" Troy Alpha Rail
Magpul Fixed Rifle Stock
Ergo Grip
Troy Fixed Front Sight (HK)
Troy Flip Up Rear
Blue Force VCAS sling (waiting on mount)
Primary Arms Micro Dot (placeholder while waiting for Aimpoint PRO)
YHM Compensator
BCM charging handle.

 

[Almostelmo]

View attachment 70636

Went full FDEtard on my M&P 15T, and I LOVE IT.
15" Troy Alpha Rail
Magpul Fixed Rifle Stock
Ergo Grip
Troy Fixed Front Sight (HK)
Troy Flip Up Rear
Blue Force VCAS sling (waiting on mount)
Primary Arms Micro Dot (placeholder while waiting for Aimpoint PRO)
YHM Compensator
BCM charging handle.

Looks good! I have always liked the long rail look.

 

[ntomsw]

View attachment 70636

Went full FDEtard on my M&P 15T, and I LOVE IT.
15" Troy Alpha Rail
Magpul Fixed Rifle Stock
Ergo Grip
Troy Fixed Front Sight (HK)
Troy Flip Up Rear
Blue Force VCAS sling (waiting on mount)
Primary Arms Micro Dot (placeholder while waiting for Aimpoint PRO)
YHM Compensator
BCM charging handle.

So full of win.

I love the FDE on my AR.

 

[hurley431]

.

 

[travis]

Ok guys this may be illegal in Mass but I will share it anyway.I cut down that 9mm barrel and had the front end left over and set it aside to take it out to the shop and throw in the leftover pile. Well went shopping with the wife today and got a brainstorm. So after I got home did a little trimming a little drilling & tapping and a little wiring. I came up with this.. I like it!! On the bottom right you can see the cut off piece used. As the barrel sight tower and flash hider are all conductive the touch sensor works no matter where you touch to turn it on.. That's right I made a AR15 LAMP in 9mm!!!

 

[ntomsw]

So EPIC. You win the internet sir.

 

[je25ff]

Do you really want a flash hider under the lamp?

 

[Donvin999]

Nice... In ma that bayo lug will get you in trouble though... Of you think an assault rifke is bad wait until you see what someone can do with an assualt lamp!

 

[chinalfr]

Completed another black evil rifle today. Here is the spec

1. Colt Preban lower
2. Magpul ACS-L stock
3. Noveske forged upper
4. Noveske Afghan 14.5 match barrel with low profile gas block
5. Battlecomp 1.5
6. Noveske NSR 13.5 Free float handguard
7. WMD NiBx BCG
8. Nikon M223 4-12x scope on Larue SPR-E mount

 

[Mass-diver]

Completed another black evil rifle today. Here is the spec

1. Colt Preban lower
2. Magpul ACS-L stock
3. Noveske forged upper
4. Noveske Afghan 14.5 match barrel with low profile gas block
5. Battlecomp 1.5
6. Noveske NSR 13.5 Free float handguard
7. WMD NiBx BCG
8. Nikon M223 4-12x scope on Larue SPR-E mount

Very, very nice!

 

[Canndo]

Ok guys this may be illegal in Mass but I will share it anyway.I cut down that 9mm barrel and had the front end left over and set it aside to take it out to the shop and throw in the leftover pile. Well went shopping with the wife today and got a brainstorm. So after I got home did a little trimming a little drilling & tapping and a little wiring. I came up with this.. I like it!! On the bottom right you can see the cut off piece used. As the barrel sight tower and flash hider are all conductive the touch sensor works no matter where you touch to turn it on.. That's right I made a AR15 LAMP in 9mm!!!

Nice. You're a very busy guy. You need a YouTube channel. Lots of cool shit. I'd subscribe.

 

[Maxxum2012]

Completed another black evil rifle today. Here is the spec

1. Colt Preban lower
2. Magpul ACS-L stock
3. Noveske forged upper
4. Noveske Afghan 14.5 match barrel with low profile gas block
5. Battlecomp 1.5
6. Noveske NSR 13.5 Free float handguard
7. WMD NiBx BCG
8. Nikon M223 4-12x scope on Larue SPR-E mount

Nice build...and I approve the M-223 (though I used the Nikon mount)!!!

 

[travis]

Nice. You're a very busy guy. You need a YouTube channel. Lots of cool shit. I'd subscribe.

Maine04657 - YouTube

 

[Evadd]

Ok guys this may be illegal in Mass but I will share it anyway.I cut down that 9mm barrel and had the front end left over and set it aside to take it out to the shop and throw in the leftover pile. Well went shopping with the wife today and got a brainstorm. So after I got home did a little trimming a little drilling & tapping and a little wiring. I came up with this.. I like it!! On the bottom right you can see the cut off piece used. As the barrel sight tower and flash hider are all conductive the touch sensor works no matter where you touch to turn it on.. That's right I made a AR15 LAMP in 9mm!!!

You could probably sell those.

 

[Canndo]

Maine04657 - YouTube

I'll be checking it out today. Thanks

 

[travis]

The UPS guy brought me a pretty new forend today. I decided on a Midwest industries 12" MI-SS-12 For the hole pattern. I went with a 12 inch as it was what I wanted the end look to be with the suppressor on it. Now I have to decide on the Eotech 512 I already have or another optic. I think it looks great.. This has the 6.5 inch barrel I removed form what later because the ar15 lamp. I think the suppressor tucked under looks wicked sexy..

 

[atmay]

The UPS guy brought me a pretty new forend today. I decided on a Midwest industries 12" MI-SS-12 For the hole pattern. I went with a 12 inch as it was what I wanted the end look to be with the suppressor on it. Now I have to decide on the Eotech 512 I already have or another optic. I think it looks great.. This has the 6.5 inch barrel I removed form what later because the ar15 lamp. I think the suppressor tucked under looks wicked sexy..

Put a better stock on it and I'll take two for christmas.

 

[travis]

Put a better stock on it and I'll take two for christmas.

If and when I find a stock that fits me better I might. Why are so many folks down on my a2 stocks? For me they are the perfect size. I have them on most every ar I own.