-
If you enjoy the forum please consider supporting it by signing up for a NES Membership The benefits pay for the membership many times over.
-
Be sure to enter the NES/Pioneer Valley Arms February Giveaway ***Smith & Wesson SD9VE 9MM***
Show me your AK
- Thread starter SKS Ray
- Start date
.
Last edited:
- Joined
- May 1, 2009
- Messages
- 3,164
- Likes
- 460
Bumping this because I just received the very last M92 kit blackthorn had. After having them for years.
I got a PM saying that my pics did not post, so I'm trying again.
Are they showing up now?
turbo38gn
NES Member
flintoid
Banned
I know I'm late getting in here, but here's my Mitchell Arms M-90 (Zastava) Yugo underfolder. Just installed my Texas Weapon Systems dogleg rail cover and peep sight. Now I just need some optics.
I hope you intend on keeping the original top cover and rear sight leaf "with" that rifle. Otherwise you just cut it's value in half.
please say he didn't, please say he didn't...
turbo38gn
NES Member
7.62... can you tell me what you are using on the end of the barrel to get the 16"...... ? thank you
I got a PM saying that my pics did not post, so I'm trying again.
Are they showing up now?
turbo38gn
NES Member
Perfect, exactly what I thought, I have the same kit as yours, is there anything else special I may need to put it together. Do I need that pap pistol Muzzle Detent Set
thanks
thanks
No, you do not need that. That is the detent for the factory MD. You will need to pin the fake can on, so detent is not necessary.
You will still need 4 more US parts (can & receiver each count as 1 ea.) FCG is a natural choice so that brings you down to 1 more. I didn't want to change any of the original furniture, so I went with a US made gas piston. I don't know what your plans are for the receiver, but be aware that the M-92 receiver is unique unto itself. The Polish PMKMS is close but the stock will be at an angle and will not close flush in the front (if you live somewhere where you are allowed to have it fold) the PG reinforcement plate is also different.
You will still need 4 more US parts (can & receiver each count as 1 ea.) FCG is a natural choice so that brings you down to 1 more. I didn't want to change any of the original furniture, so I went with a US made gas piston. I don't know what your plans are for the receiver, but be aware that the M-92 receiver is unique unto itself. The Polish PMKMS is close but the stock will be at an angle and will not close flush in the front (if you live somewhere where you are allowed to have it fold) the PG reinforcement plate is also different.
ChevyGuy91
NES Member
- Joined
- Mar 25, 2008
- Messages
- 23,660
- Likes
- 25,549
I assume this is just drilling a hole through the can into the threaded part of the front sight base. Did you just drop a pin in and throw a tack weld over it? Is there anything to worry about since the can is alum and the base is steal (I think?).
You are correct, barrel is steel and the can is aluminum which leaves you with only one choice as far as permanently attaching. Silver solder and welding will not work. You need to pin it then have the hole TIG welded to close it.
Some discussion on that in this thread. Krink build - Gunco.net
.
Last edited:
flintoid
Banned
good deal. You get it.
that rifle will be a great shooter. Yugo AK's tend to be the more accurate of the bunch.
that rifle will be a great shooter. Yugo AK's tend to be the more accurate of the bunch.
wizdoc2006
NES Member
nice wood .
Arsenal SLR 100H
Polish PKMKS (pinned/welded stock).
Romanian 'G'
Family gathering
WASR 10/63
MI railed handguard/MI side mount optic rail
TangoDown VFG
PWS FSC47 muzzle brake
Vltor stock adapter
Magpul CTR stock
Hogue pistol grip
Wilson Combat recoil buffer
Aimpoint Comp ML3 red dot
Last edited:
AllaSnackbah
NES Member
- Joined
- Sep 11, 2009
- Messages
- 9,002
- Likes
- 13,327
call me queer for tacticooling an ak, but i tried the timbersmith wood furniture to go for the classic look, hated it, didnt shoot it, so i changed it up, i have fallen in love with ak's all over again after shooting this thing. left my WASR in classic config and like that much more than the el cheapo timbersmith wood.
before
[/URL][/img]
after
now the question is, to duracoat or not to duracoat?
before
after
now the question is, to duracoat or not to duracoat?
Last edited:
some beauties on here! heres my humble contribution 
View attachment 65830some beauties on here! heres my humble contribution
Is that an AES10B on the bottom? If so how do you like that brake?
Yep it sure is. I love that rifle fun range toy but wouldn't want to lug it around too much! The brake makes no noticeable difference to me as the rifle is so heavy that it barely moves anyways. The aes10b is surprisingly accurate at much further distances than people would think.have the vids of all these rifles hitting plates EVERY SHOT at farther than people think aks can hit
I put a slant brake on mine and noticed a big difference in rapid fire compared to when it didn't have any type of brake at all, just a muzzle nut.
These are the four Maadis I put together over the winter...
^^^ awesome.
Last edited:
My only two. It's like only having 2 beers though, nearly impossible. Need more.
Last edited:
flintoid
Banned
more AK's....
ChevyGuy91
NES Member
- Joined
- Mar 25, 2008
- Messages
- 23,660
- Likes
- 25,549
Not quite yet an AK, but I have a feeling that after a few beers and some weird-ness, it will be all pew pew pew in no time.
Not quite yet an AK, but I have a feeling that after a few beers and some weird-ness, it will be all pew pew pew in no time.
unffffffff. it's so clean. so unlike our usual builds.
![[laugh]](/xen/styles/default/xenforo/smilies.vb/012.gif "Laugh [laugh]")
