Marty McFly
NES Member
The one byproduct of this shitshow is I'll be able spend more time adding laughing emojis to the classified ads. Really hoping to see an Anderson for 2k
If you enjoy the forum please consider supporting it by signing up for a NES Membership The benefits pay for the membership many times over.
Be sure to enter the NES/Pioneer Valley Arms February Giveaway ***Smith & Wesson SD9VE 9MM***
Why do you have muzzle brakes and why are they cracked?I would love to send that stupid bitch a dump truck full of shitty cracked in half muzzle brakes. f*** those things. (I realize they're sometimes useful, but more often they're just a goddam nuisance. )
Might have to 3D print some MLOK sheaths for the microtechs.In!
And I might tape a switchblade to an AR just because I can!!!!! Ned to print an MLOK Switchblade Bayonet adapter (Patent pending, all rights reserved)
Why would someone go to federal Prison for owning an 80% in MA?
Chris, you still don't get it.
Hose clamps make 1/2" fit 5/8"Why do you have muzzle brakes and why are they cracked?
YesSo that account is that fat nerdy white guy that Sharif posted a video of?
@PioneerHDSo that account is that fat nerdy white guy that Sharif posted a video of?
They'd be cracked if you just cut them off to restore the threads. (Especially if it's not easy to remove the pins. ) A lot of people just toss that shit especially if they're not going back. They're often noisy and ineffective. Especially a lot of the cheapos people use for compliance.Why do you have muzzle brakes and why are they cracked?
2k? Shit I'm asking at least 3500 for mine.The one byproduct of this shitshow is I'll be able spend more time adding laughing emojis to the classified ads. Really hoping to see an Anderson for 2k
Thats why I at least threw brakes that are common suppressor mounts on. I have money for the surefire cans once I moveThey'd be cracked if you just cut them off to restore the threads. (Especially if it's not easy to remove the pins. ) A lot of people just toss that shit especially if they're not going back. They're often noisy and ineffective. Especially a lot of the cheapos people use for compliance.
Y'all actually pinned them?They'd be cracked if you just cut them off to restore the threads. (Especially if it's not easy to remove the pins. ) A lot of people just toss that shit especially if they're not going back. They're often noisy and ineffective. Especially a lot of the cheapos people use for compliance.
Preban baby!2k? Shit I'm asking at least 3500 for mine.
The keister may be the official new holster of the former MA legal gun ownersHide it up your ass.
I agree with all of this except the last six words.This law has become a shit show. The new training was suspended for 18 months it's ok to use current training and when you renew your LTC or FID if received after 08/01/2024 how will they justify taking away your licence after you have had it for 5-6 years, then dealers can sell long guns ( for how long) no ones knows it maybe for the next ten years if they can't get the roster up and running. This is a total joke just wate for more guidance, gutting this law like transporting firearm through the state by common carrier. They have made stupid laws and now they don't know what to do with them except gut them. The state legislature has over stepped and now they are just looking stupid.
HealeyPreamble
www.goal.org
Generally no, although sometimes on short guns you have to pin/weld to avoid Federal/ATF issues to guarantee minimum 16" barrel length to avoid creating an illegal SBR if you're not otherwise building a pistol.....Y'all actually pinned them?
14.5 p/w makes the most sense in MAGenerally no, although sometimes on short guns you have to pin/weld to avoid Federal/ATF issues to guarantee minimum 16" barrel length to avoid creating an illegal SBR if you're not otherwise building a pistol.....
Also a lot of mass guns came "pref***ed from the factory" with that shit so the guns could legally cross the counter from whoever is selling them. So there’s a lot of stuff out there with turds pinned and welded on the output end.
Who estimated that and based on what change from this piece of garbage?One of the side effects of this law is the loss of revenue to the Div. of Fish and Wildlife. I heard an estimate of over 9 million over the next two years. That will pretty much end the Pheasent Stocking Program.
I just sent any 14.5s with muzzle device to vlasic and had them twist em on. No way that shits coming off.Generally no, although sometimes on short guns you have to pin/weld to avoid Federal/ATF issues to guarantee minimum 16" barrel length to avoid creating an illegal SBR if you're not otherwise building a pistol.....
Also a lot of mass guns came "pref***ed from the factory" with that shit so the guns could legally cross the counter from whoever is selling them. So there’s a lot of stuff out there with turds pinned and welded on the output end.
Those made me get delta dental@Broc Tuah like this thing
View attachment 923373
f*** this brake. These are horrible. And there are hundreds of mass ARs with this POS on the end. These all belong in the trash. All it does is punch people in the face and barely reduces recoil/flip. At least when people have annoying shit like an SJC titan it actually works, it has a reason to exist.
Only if the stock is real HK.Is my SP5 worth $10K yet?
Dude got butthurt I laugh emoji’d his post and messaged me about it.2k? Shit I'm asking at least 3500 for mine.
Grabbed one 7/28/24 and sbr'd it....Only if the stock is real HK.
I'll take that, and raise you a Stag 3g brake. This thing clears out a range faster than anything else I own. I don't even shoot it when people I don't regularly shoot with are around. It does actually work though, too well even.@Broc Tuah like this thing
View attachment 923373
f*** this brake. These are horrible. And there are hundreds of mass ARs with this POS on the end. These all belong in the trash. All it does is punch people in the face and barely reduces recoil/flip. At least when people have annoying shit like an SJC titan it actually works, it has a reason to exist.
I have a rifle I bring out when people are annoying lolI'll take that, and raise you a Stag 3g brake. This thing clears out a range faster than anything else I own. I don't even shoot it when people I don't regularly shoot with are around.
New Glocks are on the roster but forbidden on the secret AG list.
Will shops still sell them tomorrow???
Sometimes you need to make some extra space if it's crowded. A loud brake is a lot easier than whipping it out on the firing line - that's frowned upon apparently. They didn't have to call the cops though.I have a rifle I bring out when people are annoying lol
I met up with a guy to buy from and he was fuming that someone laughed at an ad he had. It was an old colt for retarded money. He let me look at the other item while he wrote a 20 minute message to the guy .Dude got butthurt I laugh emoji’d his post and messaged me about it.
I’d f***in do it again.