Larry has it for $472.99 at the moment.
-
If you enjoy the forum please consider supporting it by signing up for a NES Membership The benefits pay for the membership many times over.
-
Be sure to enter the NES/Pioneer Valley Arms February Giveaway ***Smith & Wesson SD9VE 9MM***
NFA Items - Picture thread
- Thread starter Sinitron
- Start date
Larry has it for $472.99 at the moment.
Better jump on it! I waited for months for it to be in stock. There might be some free shipping coupons too.
Good price too. I paid the list price earlier this year.
Get the Nordic. Mine has worked very well and my son loves to shoot it
Went with an Aero precision 10.5” in 5.56 as a second upper (bottom). With 300 being scarce these days, I would rather save what I have and shoot 5.56. Not sure which handguard I like best... magpul or the standard one.
Tell me about that mount for the RDS on the 12.5, please.
JRT
NES Member
My little TacSol X-Ring backpacker SBR and the CGS Siren silencer. Loaded it’s under 4 pounds.
im using the arisaka mount for the offset rds.
the mount itself can be set for a 33* or a 45* offset depending how big your primary optic is. I have mine mounted a bit close to the LPVO. The turret appears barely thru my red dot but when shooting with both eyes open the sight picture is pretty good. I just found the 33* option being closer to the LPVO helped me keep the same cheek weld while transitioning.
kro77
NES Member
My newest nfa
12.5 gang
Playing around with the vortex BDC in this scope with my ammo before dropping the coin on the Razor Gen III MOA.
MIL
Eh. I like MIL trees for precision gun type work or on a gun with no chance for a BDC to line up(like my 16” 6.5CM AR10). But for a carbine like this, I prefer the speed of calibrated BDCs with wind holds. They’re faster. Now, if someone would come out with an LPVO reticle that had wind holds next to MIL elevation stadia lines, I’d REALLY dig that. Not just more MIL dots. Kind of like the top part of the TREMOR 3. Until then...
Last edited:
JRT
NES Member
Playing assassin
- Beretta 21 A Bobcat extended and threaded by Tornado Technologies
- Bowers Bitty Silencer
- Safety lever converted to a slide lock for the ultimate single shot assassin pistol
- Manual not read or understood
Last edited:
Mine's definitely a lower-rent version of yours, but I do like the small, silenced-22 platform.
JRT
NES Member
Oculus shorty looks good! I don’t know Phoenix Arms, is that made from a S&W design? Model 61 I think???
No, it's a little "Ring of Fire" gun, single action, exposed hammer. It was stupid cheap ($125 OTD). It comes with a couple of PITA "features," like the safety that keeps you from removing the mag, etc. but those are well documented and take about 10 minutes to fix. It's actually a very reliable (and fun) little gun, and makes a quiet host. I keep trying to get my wife to carry it in this configuration when she goes on her nature walks, but she prefers the LCP II .22LR.
JRT
NES Member
Happy St Patrick’s Day!
I’m going to be drinking green beer in the ghetto at some point today, the Bazooka Green Ghetto Blaster feels like the right gun to throw in the backpack.
- Noveske Ghetto Blaster
- Q Trash Panda
- Classy 20 round Lancer mags
I’m going to be drinking green beer in the ghetto at some point today, the Bazooka Green Ghetto Blaster feels like the right gun to throw in the backpack.
- Noveske Ghetto Blaster
- Q Trash Panda
- Classy 20 round Lancer mags
Changed it up to a Magpul SL-K
kro77
NES Member
What rear sight replacement do you have to hold the RMR?
kro77
NES Member
You are such a purist NG...
not new guy
NES Member
- Joined
- Dec 7, 2009
- Messages
- 39,029
- Likes
- 62,629
not new guy
NES Member
- Joined
- Dec 7, 2009
- Messages
- 39,029
- Likes
- 62,629
Lol you need to fix both. Esp the paddle tho.No trilug (ever) and no paddle (yet) - I'm not that pure.![[smile]](/xen/styles/default/xenforo/smilies.vb/001.gif "Smile [smile]")
not new guy
NES Member
- Joined
- Dec 7, 2009
- Messages
- 39,029
- Likes
- 62,629
Lol you need to fix both. Esp the paddle tho.
I have the drop in paddle kit already, just working up the courage to take a dremel with a cutting bit to the inside of the magwell to remove the block that HK puts in now.
A proper trilug from B&T is like $400 before getting into the cost and hassle of finding someone to swap them. I won’t be putting a can on it so meh.
I didn’t realize the K didn’t come with one or at least a threaded barrel....
not new guy
NES Member
- Joined
- Dec 7, 2009
- Messages
- 39,029
- Likes
- 62,629
I think there's a PDW version and then there's this other version, with is apparently one for the EU market as it doesn't have the usual big mag well billboard on it (see kro77's pic above). The PDW version might have the paddle and trilug. This one had the handguard nub that extends past the end of the barrel, which is a tiny bit shorter and unthreaded.
kro77
NES Member
Its funny we may be the only two people in Mass with that variant, what a small world
I've got the PDW style with paddle way back on the first page, wears B&T stock and 3-lug muzzle device. They're a lot of fun.
