Fresh rebuild of one of my .300BLK SBRs, this time with the Adams Arms Micro Piston kit. Can is a Rebel DFNDR9 remachined to accept the YHM QD system.
Shit-ton of Fun for the Whole FamilyTM
-
If you enjoy the forum please consider supporting it by signing up for a NES Membership The benefits pay for the membership many times over.
-
Be sure to enter the NES/Pioneer Valley Arms February Giveaway ***Smith & Wesson SD9VE 9MM***
NFA Items - Picture thread
- Thread starter Sinitron
- Start date
Fresh rebuild of one of my .300BLK SBRs, this time with the Adams Arms Micro Piston kit. Can is a Rebel DFNDR9 remachined to accept the YHM QD system.
Shit-ton of Fun for the Whole FamilyTM
kro77
NES Member
That is nice, and NG agree that is a better stock. I wish someone made a good looking a3 type stock.
JRT
NES Member
I hate that you have to pin that, It’s criminal.
Not big on posting gun pics, but I finished these a couple months ago and well...... And yes, one is missing the trigger guard, the replacement is on the way, just pretend it's there.
Chad at Nitor did engraved a scorpion barrel for me last week. Another great experience
Are those brownells BRN-180 uppers?
JRT
NES Member
Are they the Gen 2 with adjustable gas? If so do you run them with a silencer? How are they? I want to do a build with a law folder.
They are gen 2 and the suressors aren't on YET, one is in NFA limbo and the other is still on it's way to the shop. They run pretty dam good, no real issues. The 300 has an issue with hire velocity ammo, the bolt hold open will bounce up and catch the bolt. This isn't an upper problem. I'm going to change out the release for an ambi one and see about a heavier spring. You can't use the magpul MAD lever, the clamp hits the upper receiver so it's always on. I may even build something loger for a scope on the 180 upper, I got an email yesterday saying they had more in stock.
JRT
NES Member
Since the ATF sent me a Sunday approval, I installed the stock.
Last edited:
Looks like you’re all set to put down those filthy rebels in District 12. Watch out for the sassy teenager that can’t act.
I keed; looks good.
I was just looking at vectors the other day. I used to hate them, but that's changed
Theoldhag88
NES Member
- Joined
- May 16, 2011
- Messages
- 1,068
- Likes
- 505
Stamp approved late last month, got the stock in, just need to zero it.
Finally got my LCP II 22 where I want it.
Factory threaded barrel, upgraded sights by Innovative Arms. Small, reliable, and quiet.
Factory threaded barrel, upgraded sights by Innovative Arms. Small, reliable, and quiet.
Cap'n Mike
NES Member
Very accurate XM177E2 Clone that can also be a half assed Colt Commando/733 Clone
Figured I’d spice this thread up a bit.
Wall of fun
Top row
Ruger Mark II integrally Suppressed barrel
Glock 17 with Fun Switch post sample
Ruger Mark IV with Ruger Silencer
Ruger Mark I SBR and integrally Suppressed barrel
row below top row and behind
12g 'pistol' with 5.75 inch barrel
KP-44 SBR with full auto post sample bolt
Next row
Semi Auto 1919A4 with post sample full auto bolt
M16A2 clone with 3rd burst
AR9 SBR with silencer
M1 Carbine, Full auto post sample
Uzi ,Full Auto post sample
PPS43 SBR with Full Auto post sample bolt
Cobray M11 transferable full auto
MP40P SBR
Bottom Row
AR9 Full Auto post sample
AR-15 Full Auto 10.5" barrel post sample
WWSD AR-15 full auto post sample
Mosin Nagant 91/30 SBR with 12.5 inch barrel
20g with 11 inch barrel
Ruger 10/22 with integrally suppressed barrel
Cobray CM11 SBR
Cobray Street Sweeper
Front row
Semi Auto MG42 with post sample full auto bolt
Sten Mark 2 full auto post sample
Top row
Ruger Mark II integrally Suppressed barrel
Glock 17 with Fun Switch post sample
Ruger Mark IV with Ruger Silencer
Ruger Mark I SBR and integrally Suppressed barrel
row below top row and behind
12g 'pistol' with 5.75 inch barrel
KP-44 SBR with full auto post sample bolt
Next row
Semi Auto 1919A4 with post sample full auto bolt
M16A2 clone with 3rd burst
AR9 SBR with silencer
M1 Carbine, Full auto post sample
Uzi ,Full Auto post sample
PPS43 SBR with Full Auto post sample bolt
Cobray M11 transferable full auto
MP40P SBR
Bottom Row
AR9 Full Auto post sample
AR-15 Full Auto 10.5" barrel post sample
WWSD AR-15 full auto post sample
Mosin Nagant 91/30 SBR with 12.5 inch barrel
20g with 11 inch barrel
Ruger 10/22 with integrally suppressed barrel
Cobray CM11 SBR
Cobray Street Sweeper
Front row
Semi Auto MG42 with post sample full auto bolt
Sten Mark 2 full auto post sample
JRT
NES Member
You’re shooting .22 through your Odessa? It’s kind of a bitch to clean.
JRT
NES Member
My first AK since I sold the tranny AK and my second one ever.
Bulgarian girls are smoke-shows. Arsenal AK, Arsenal silencer (GSL made) and old school Bulgarian mags.
Bulgarian girls are smoke-shows. Arsenal AK, Arsenal silencer (GSL made) and old school Bulgarian mags.
JRT
NES Member
Yes, bought as a pistol and did an eForm 1.
Your timing is poor. It was easier prior to 2016. I have 8 AK SBRs. My 8th one was transfered to me by Greg at GFA on 7/16/2016. Impeccable timing
Lol yup tell me about it.
Funny I transferred my Arsenal SAM7 rifle just over a week before the 2016 bs
JRT
NES Member
Isn’t your thing in Mass that you can’t bring it in as a pistol because of some list and then do an eForm 1? They sell this model as a factory SBR, you can buy it on an eForm 4 if that’s cool in Mass. Yeah it will take a little longer than an eForm 1 but it’s better than it used to be.
Last edited:
An FFL in MA can recieve and 4473 a pistol for you then to make it legal you need to form 1 it to make it a rifle , at which point its legal to own in MA by us peasants. Most (not all) ffls will require you to have them hold it while the form 1 is pending.
